Hydrothermal synthesis of lead titanate and lead zirconate titanate electroceramic particles

Ender Suvaci, Aydin Doǧan, Julie Anderson, James Hansell Adair

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Hydrothermal synthesis of two lead-based perovskite powder systems, lead titanate and lead zirconate titanate, was investigated. Phase-pure perovskite lead titanate and lead zirconate titanate with various morphologies have been synthesized by hydrothermal methods at 150° and 175°C, respectively. Solution pH should be greater than 14 to obtain the phase-pure perovskite phases in a reasonable time. In addition, the KOH concentration and the stirring rate significantly influence particle morphology of the hydrothermally derived PT and PZT. Therefore, these parameters can be used to tailor particle size and morphology.

Original languageEnglish (US)
Pages (from-to)843-852
Number of pages10
JournalChemical Engineering Communications
Volume190
Issue number5-8
DOIs
StatePublished - May 1 2003

Fingerprint

Hydrothermal synthesis
Perovskite
Lead
Powders
Particle size
lead titanate
perovskite
lead titanate zirconate

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

Cite this

@article{60d58eaadddb4b7e8574db49950b8b23,
title = "Hydrothermal synthesis of lead titanate and lead zirconate titanate electroceramic particles",
abstract = "Hydrothermal synthesis of two lead-based perovskite powder systems, lead titanate and lead zirconate titanate, was investigated. Phase-pure perovskite lead titanate and lead zirconate titanate with various morphologies have been synthesized by hydrothermal methods at 150° and 175°C, respectively. Solution pH should be greater than 14 to obtain the phase-pure perovskite phases in a reasonable time. In addition, the KOH concentration and the stirring rate significantly influence particle morphology of the hydrothermally derived PT and PZT. Therefore, these parameters can be used to tailor particle size and morphology.",
author = "Ender Suvaci and Aydin Doǧan and Julie Anderson and Adair, {James Hansell}",
year = "2003",
month = "5",
day = "1",
doi = "10.1080/00986440302106",
language = "English (US)",
volume = "190",
pages = "843--852",
journal = "Chemical Engineering Communications",
issn = "0098-6445",
publisher = "Taylor and Francis Ltd.",
number = "5-8",

}

Hydrothermal synthesis of lead titanate and lead zirconate titanate electroceramic particles. / Suvaci, Ender; Doǧan, Aydin; Anderson, Julie; Adair, James Hansell.

In: Chemical Engineering Communications, Vol. 190, No. 5-8, 01.05.2003, p. 843-852.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Hydrothermal synthesis of lead titanate and lead zirconate titanate electroceramic particles

AU - Suvaci, Ender

AU - Doǧan, Aydin

AU - Anderson, Julie

AU - Adair, James Hansell

PY - 2003/5/1

Y1 - 2003/5/1

N2 - Hydrothermal synthesis of two lead-based perovskite powder systems, lead titanate and lead zirconate titanate, was investigated. Phase-pure perovskite lead titanate and lead zirconate titanate with various morphologies have been synthesized by hydrothermal methods at 150° and 175°C, respectively. Solution pH should be greater than 14 to obtain the phase-pure perovskite phases in a reasonable time. In addition, the KOH concentration and the stirring rate significantly influence particle morphology of the hydrothermally derived PT and PZT. Therefore, these parameters can be used to tailor particle size and morphology.

AB - Hydrothermal synthesis of two lead-based perovskite powder systems, lead titanate and lead zirconate titanate, was investigated. Phase-pure perovskite lead titanate and lead zirconate titanate with various morphologies have been synthesized by hydrothermal methods at 150° and 175°C, respectively. Solution pH should be greater than 14 to obtain the phase-pure perovskite phases in a reasonable time. In addition, the KOH concentration and the stirring rate significantly influence particle morphology of the hydrothermally derived PT and PZT. Therefore, these parameters can be used to tailor particle size and morphology.

UR - http://www.scopus.com/inward/record.url?scp=0242318750&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0242318750&partnerID=8YFLogxK

U2 - 10.1080/00986440302106

DO - 10.1080/00986440302106

M3 - Article

VL - 190

SP - 843

EP - 852

JO - Chemical Engineering Communications

JF - Chemical Engineering Communications

SN - 0098-6445

IS - 5-8

ER -