Improvement of the elastic modulus of micromachined structures using carbon nanotubes

Prasoon Joshi, Nicolás B. Duarte, Abhijat Goyal, Awnish Gupta, Srinivas A. Tadigadapa, Peter C. Eklund

Research output: Contribution to journalConference article

Abstract

Microelectromechanical flexural structures have been fabricated using sandwiched multilayers consisting of bundled singled walled carbon nanotubes(SWNTs) incorporated into silicon nitride (Si3N 4) films. The Si3N4-SWNT composite layer was patterned by reactive ion etching followed by release in XeF2 to create freestanding bridge structures. The mechanical stiffness of the micromechanical bridges was monitored via force-displacement (F-D) curves obtained using an Atomic Force Microscope (AFM). Inclusion of SWNTs resulted in an increase in the spring constant of the bridge by as much as 64%, with an average increase of 25%. In a second experiment, micromachined bridges fabricated using dissolved wafer process were coated with debundled SWNTs. The SWNTs suspended in N-methyl-2-pyrrolidinone (NMP) solvent were sprayed locally on each bridge using a piezoelectric print head. Resonance frequency measurements were done in vacuum (∼10-4 Torr) on the bridges after successive SWNT depositions. A 20% increase in the resonance frequency of the bridges was observed. The observed increase in stiffness in the first set of experiments as well as the observed increase in the frequency in the second set of experiments can be attributed to the high axial modulus of elasticity (∼1 TPa) of the carbon nanotubes.

Original languageEnglish (US)
Article numberO1.5
Pages (from-to)27-32
Number of pages6
JournalMaterials Research Society Symposium Proceedings
Volume875
DOIs
StatePublished - 2005
Event2005 Materials Research Society Spring Meeting - San Francisco, CA, United States
Duration: Mar 28 2005Apr 1 2005

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Improvement of the elastic modulus of micromachined structures using carbon nanotubes'. Together they form a unique fingerprint.

  • Cite this

    Joshi, P., Duarte, N. B., Goyal, A., Gupta, A., Tadigadapa, S. A., & Eklund, P. C. (2005). Improvement of the elastic modulus of micromachined structures using carbon nanotubes. Materials Research Society Symposium Proceedings, 875, 27-32. [O1.5]. https://doi.org/10.1557/proc-875-o1.5