In Vitro Measurements of First and Second Tarsometatarsal Joint Stiffness

Andrew R. Fauth, Andrew J. Hamel, Neil A. Sharkey

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

This study involved a biomechanical examination of the first and second tarsometatarsal (TMT) joints. In the in vitro testing protocol, physiologic joint moments were applied to the first and second TMT joints of 10 cadaver specimens, which had been dissected to yield only the midfoot components comprising the tarsals, metatarsals, and associated ligaments. The isolated joints were placed in a 37 °C water bath and were independently cycled into and out of dorsiflexion, while angular displacement and resultant joint moments were collected. The specimens were sequentially cycled between zero and peak moment levels of 2.5, 5.0, 7.5, and 10 Nm, after which mean moment-angle curves were plotted for each TMT joint at each loading condition. Least-squares curve-fitting procedures, employing a root mean square error threshold of 0.005 Nm, were used to describe the average overall moment vs. angle relationship of each joint. Curves for the first and second TMT joints exhibited similar behavior. The joints displayed reasonably constant stiffness at low angles of dorsiflexion, followed by rapidly increasing stiffness at higher angles of dorsiflexion. These data provide new insight into the behavior of the TMT joints under load and are valuable for use in numerical models of the foot, as well as in the understanding and treatment of certain foot pathologies.

Original languageEnglish (US)
Pages (from-to)14-24
Number of pages11
JournalJournal of applied biomechanics
Volume20
Issue number1
DOIs
StatePublished - Feb 2004

Fingerprint

Joints
Foot
In Vitro Techniques
Metatarsal Bones
Least-Squares Analysis
Baths
Cadaver
Ligaments
Pathology
Water

All Science Journal Classification (ASJC) codes

  • Biophysics
  • Orthopedics and Sports Medicine
  • Rehabilitation

Cite this

@article{8cb88f776d8c46ce9dc76765cfa36584,
title = "In Vitro Measurements of First and Second Tarsometatarsal Joint Stiffness",
abstract = "This study involved a biomechanical examination of the first and second tarsometatarsal (TMT) joints. In the in vitro testing protocol, physiologic joint moments were applied to the first and second TMT joints of 10 cadaver specimens, which had been dissected to yield only the midfoot components comprising the tarsals, metatarsals, and associated ligaments. The isolated joints were placed in a 37 °C water bath and were independently cycled into and out of dorsiflexion, while angular displacement and resultant joint moments were collected. The specimens were sequentially cycled between zero and peak moment levels of 2.5, 5.0, 7.5, and 10 Nm, after which mean moment-angle curves were plotted for each TMT joint at each loading condition. Least-squares curve-fitting procedures, employing a root mean square error threshold of 0.005 Nm, were used to describe the average overall moment vs. angle relationship of each joint. Curves for the first and second TMT joints exhibited similar behavior. The joints displayed reasonably constant stiffness at low angles of dorsiflexion, followed by rapidly increasing stiffness at higher angles of dorsiflexion. These data provide new insight into the behavior of the TMT joints under load and are valuable for use in numerical models of the foot, as well as in the understanding and treatment of certain foot pathologies.",
author = "Fauth, {Andrew R.} and Hamel, {Andrew J.} and Sharkey, {Neil A.}",
year = "2004",
month = "2",
doi = "10.1123/jab.20.1.14",
language = "English (US)",
volume = "20",
pages = "14--24",
journal = "Journal of Applied Biomechanics",
issn = "1065-8483",
publisher = "Human Kinetics Publishers Inc.",
number = "1",

}

In Vitro Measurements of First and Second Tarsometatarsal Joint Stiffness. / Fauth, Andrew R.; Hamel, Andrew J.; Sharkey, Neil A.

In: Journal of applied biomechanics, Vol. 20, No. 1, 02.2004, p. 14-24.

Research output: Contribution to journalArticle

TY - JOUR

T1 - In Vitro Measurements of First and Second Tarsometatarsal Joint Stiffness

AU - Fauth, Andrew R.

AU - Hamel, Andrew J.

AU - Sharkey, Neil A.

PY - 2004/2

Y1 - 2004/2

N2 - This study involved a biomechanical examination of the first and second tarsometatarsal (TMT) joints. In the in vitro testing protocol, physiologic joint moments were applied to the first and second TMT joints of 10 cadaver specimens, which had been dissected to yield only the midfoot components comprising the tarsals, metatarsals, and associated ligaments. The isolated joints were placed in a 37 °C water bath and were independently cycled into and out of dorsiflexion, while angular displacement and resultant joint moments were collected. The specimens were sequentially cycled between zero and peak moment levels of 2.5, 5.0, 7.5, and 10 Nm, after which mean moment-angle curves were plotted for each TMT joint at each loading condition. Least-squares curve-fitting procedures, employing a root mean square error threshold of 0.005 Nm, were used to describe the average overall moment vs. angle relationship of each joint. Curves for the first and second TMT joints exhibited similar behavior. The joints displayed reasonably constant stiffness at low angles of dorsiflexion, followed by rapidly increasing stiffness at higher angles of dorsiflexion. These data provide new insight into the behavior of the TMT joints under load and are valuable for use in numerical models of the foot, as well as in the understanding and treatment of certain foot pathologies.

AB - This study involved a biomechanical examination of the first and second tarsometatarsal (TMT) joints. In the in vitro testing protocol, physiologic joint moments were applied to the first and second TMT joints of 10 cadaver specimens, which had been dissected to yield only the midfoot components comprising the tarsals, metatarsals, and associated ligaments. The isolated joints were placed in a 37 °C water bath and were independently cycled into and out of dorsiflexion, while angular displacement and resultant joint moments were collected. The specimens were sequentially cycled between zero and peak moment levels of 2.5, 5.0, 7.5, and 10 Nm, after which mean moment-angle curves were plotted for each TMT joint at each loading condition. Least-squares curve-fitting procedures, employing a root mean square error threshold of 0.005 Nm, were used to describe the average overall moment vs. angle relationship of each joint. Curves for the first and second TMT joints exhibited similar behavior. The joints displayed reasonably constant stiffness at low angles of dorsiflexion, followed by rapidly increasing stiffness at higher angles of dorsiflexion. These data provide new insight into the behavior of the TMT joints under load and are valuable for use in numerical models of the foot, as well as in the understanding and treatment of certain foot pathologies.

UR - http://www.scopus.com/inward/record.url?scp=1342290859&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=1342290859&partnerID=8YFLogxK

U2 - 10.1123/jab.20.1.14

DO - 10.1123/jab.20.1.14

M3 - Article

AN - SCOPUS:1342290859

VL - 20

SP - 14

EP - 24

JO - Journal of Applied Biomechanics

JF - Journal of Applied Biomechanics

SN - 1065-8483

IS - 1

ER -