Incident angle selection for the guided wave inspection of pipe defects

L. Liu, M. J. Avioli, J. L. Rose

Research output: Contribution to journalArticlepeer-review

5 Scopus citations

Abstract

The work reported here is focused on the experiments conducted for a choice of incident angle in ultrasonic guided wave inspection of blind pipe. Of hundreds of test point possibilities from the dispersion curves, some points are much better than others from a detection point of view. Reasons are based on wave structure across the thickness of the pipe, which changes drastically as you move along each individual mode on a dispersion curve. Incident angle is related to phase velocity via Snell's law. The phase velocity dispersion curves on pipes were tested at different frequencies and incident angles. Different machined defects on pipes were detected by shifting the incident angle of the transducer and then scanning frequency. The incident angle for the most effective detection of different defects in pipes was found from the test results.

Original languageEnglish (US)
Pages (from-to)89-92
Number of pages4
JournalInsight: Non-Destructive Testing and Condition Monitoring
Volume43
Issue number2
StatePublished - Feb 1 2001

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Incident angle selection for the guided wave inspection of pipe defects'. Together they form a unique fingerprint.

Cite this