Influences of a temperature gradient and fluid inertia on acoustic streaming in a standing wave

Michael W. Thompson, Anthony A. Atchley, Michael J. Maccarone

Research output: Contribution to journalArticlepeer-review

48 Scopus citations

Abstract

Following the experimental method of Thompson and Atchley [J. Acoust. Soc. Am. 117, 1828-1838 (2005)] laser Doppler anemometry (LDA) is used to investigate the influences of a thermoacoustically induced axial temperature gradient and of fluid inertia on the acoustic streaming generated in a cylindrical standing-wave resonator filled with air driven sinusoidally at a frequency of 308 Hz. The axial component of Lagrangian streaming velocity is measured along the resonator axis and across the diameter at acoustic-velocity amplitudes of 2.1, 4.3, 6.1, and 8.6 m/s at the velocity antinodes. The magnitude of the axial temperature gradient along the resonator wall is varied between approximately 0 and 8 K/m by repeating measurements with the resonator either surrounded by a water jacket, suspended within an air-filled tank, or wrapped in foam insulation. A significant correlation is observed between the temperature gradient and the behavior of the streaming: as the magnitude of the temperature gradient increases, the magnitude of the streaming decreases and the shape of the streaming cell becomes increasingly distorted. The observed steady-state streaming velocities are not in agreement with any available theory.

Original languageEnglish (US)
Pages (from-to)1839-1849
Number of pages11
JournalJournal of the Acoustical Society of America
Volume117
Issue number4 I
DOIs
StatePublished - Apr 1 2005

All Science Journal Classification (ASJC) codes

  • Arts and Humanities (miscellaneous)
  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Influences of a temperature gradient and fluid inertia on acoustic streaming in a standing wave'. Together they form a unique fingerprint.

Cite this