Installation of a high sensitivity ocean borehole strainmeter in the Nankai trough under severe sea current conditions

Yuya Machida, Eiichiro Araki, Toshinori Kimura, Demian Saffer, Tomokazu Saruhashi, Takahiro Yokoyama, Noriaki Sakurai

Research output: Contribution to journalArticle

Abstract

A high-sensitivity volumetric strainmeter has been installed into the C0010 borehole observatory using the drilling vessel (D/ V) Chikyu during the Expedition 365 cruise in the Nankai Trough, Japan. At this location, crustal deformation occurs in association with large interplate earthquakes. However, strong Kuroshio ocean currents cause vortex-induced vibrations (VIVs) in the region, which can cause fatal damage to the strainmeter. Therefore, laboratory vibration tests were performed prior to installation to confirm that the antivibration mechanism inside the strainmeter was functional against the severe vibrations during installation. VIV was measured prior to installing the strainmeter into the C0010A borehole using accelerometers at the installation site. The results indicated that the VIV were within the specification of the antivibration mechanism. This meant that installation of the strainmeter into the borehole was possible. To maximize sensor sensitivity, it is extremely important to ensure mechanical coupling of the strainmeter with the borehole wall by cementing operation after installation. The cementing process was confirmed using a pressure recording device incorporated within the strainmeter. Pressure data clearly showed that seawater had been displaced with cement slurry. Data from the strainmeter clearly showed tidal waveforms, which are comparable to those of pressure data recorded by a borehole pressure sensor installed at approximately the same depth. Accuracies of the strain data were validated through the procedure. They suggest that the first installation of the ocean borehole strainmeter in the Nankai Trough was successful, and therefore, highly sensitive strain measurement is now possible in a seismically active area.

Original languageEnglish (US)
Pages (from-to)128-137
Number of pages10
JournalMarine Technology Society Journal
Volume52
Issue number3
DOIs
StatePublished - May 1 2018

Fingerprint

Boreholes
trough
borehole
vibration
ocean
vortex
Vortex flow
sensor
Ocean currents
strain measurement
Strain measurement
accelerometer
crustal deformation
Pressure sensors
Observatories
Seawater
Accelerometers
slurry
sea
Earthquakes

All Science Journal Classification (ASJC) codes

  • Oceanography
  • Ocean Engineering

Cite this

Machida, Yuya ; Araki, Eiichiro ; Kimura, Toshinori ; Saffer, Demian ; Saruhashi, Tomokazu ; Yokoyama, Takahiro ; Sakurai, Noriaki. / Installation of a high sensitivity ocean borehole strainmeter in the Nankai trough under severe sea current conditions. In: Marine Technology Society Journal. 2018 ; Vol. 52, No. 3. pp. 128-137.
@article{f284c12510bf4dfb9b9c25ff4b9ec3b7,
title = "Installation of a high sensitivity ocean borehole strainmeter in the Nankai trough under severe sea current conditions",
abstract = "A high-sensitivity volumetric strainmeter has been installed into the C0010 borehole observatory using the drilling vessel (D/ V) Chikyu during the Expedition 365 cruise in the Nankai Trough, Japan. At this location, crustal deformation occurs in association with large interplate earthquakes. However, strong Kuroshio ocean currents cause vortex-induced vibrations (VIVs) in the region, which can cause fatal damage to the strainmeter. Therefore, laboratory vibration tests were performed prior to installation to confirm that the antivibration mechanism inside the strainmeter was functional against the severe vibrations during installation. VIV was measured prior to installing the strainmeter into the C0010A borehole using accelerometers at the installation site. The results indicated that the VIV were within the specification of the antivibration mechanism. This meant that installation of the strainmeter into the borehole was possible. To maximize sensor sensitivity, it is extremely important to ensure mechanical coupling of the strainmeter with the borehole wall by cementing operation after installation. The cementing process was confirmed using a pressure recording device incorporated within the strainmeter. Pressure data clearly showed that seawater had been displaced with cement slurry. Data from the strainmeter clearly showed tidal waveforms, which are comparable to those of pressure data recorded by a borehole pressure sensor installed at approximately the same depth. Accuracies of the strain data were validated through the procedure. They suggest that the first installation of the ocean borehole strainmeter in the Nankai Trough was successful, and therefore, highly sensitive strain measurement is now possible in a seismically active area.",
author = "Yuya Machida and Eiichiro Araki and Toshinori Kimura and Demian Saffer and Tomokazu Saruhashi and Takahiro Yokoyama and Noriaki Sakurai",
year = "2018",
month = "5",
day = "1",
doi = "10.4031/MTSJ.52.3.2",
language = "English (US)",
volume = "52",
pages = "128--137",
journal = "Marine Technology Society Journal",
issn = "0025-3324",
publisher = "Marine Technology Society Inc.",
number = "3",

}

Installation of a high sensitivity ocean borehole strainmeter in the Nankai trough under severe sea current conditions. / Machida, Yuya; Araki, Eiichiro; Kimura, Toshinori; Saffer, Demian; Saruhashi, Tomokazu; Yokoyama, Takahiro; Sakurai, Noriaki.

In: Marine Technology Society Journal, Vol. 52, No. 3, 01.05.2018, p. 128-137.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Installation of a high sensitivity ocean borehole strainmeter in the Nankai trough under severe sea current conditions

AU - Machida, Yuya

AU - Araki, Eiichiro

AU - Kimura, Toshinori

AU - Saffer, Demian

AU - Saruhashi, Tomokazu

AU - Yokoyama, Takahiro

AU - Sakurai, Noriaki

PY - 2018/5/1

Y1 - 2018/5/1

N2 - A high-sensitivity volumetric strainmeter has been installed into the C0010 borehole observatory using the drilling vessel (D/ V) Chikyu during the Expedition 365 cruise in the Nankai Trough, Japan. At this location, crustal deformation occurs in association with large interplate earthquakes. However, strong Kuroshio ocean currents cause vortex-induced vibrations (VIVs) in the region, which can cause fatal damage to the strainmeter. Therefore, laboratory vibration tests were performed prior to installation to confirm that the antivibration mechanism inside the strainmeter was functional against the severe vibrations during installation. VIV was measured prior to installing the strainmeter into the C0010A borehole using accelerometers at the installation site. The results indicated that the VIV were within the specification of the antivibration mechanism. This meant that installation of the strainmeter into the borehole was possible. To maximize sensor sensitivity, it is extremely important to ensure mechanical coupling of the strainmeter with the borehole wall by cementing operation after installation. The cementing process was confirmed using a pressure recording device incorporated within the strainmeter. Pressure data clearly showed that seawater had been displaced with cement slurry. Data from the strainmeter clearly showed tidal waveforms, which are comparable to those of pressure data recorded by a borehole pressure sensor installed at approximately the same depth. Accuracies of the strain data were validated through the procedure. They suggest that the first installation of the ocean borehole strainmeter in the Nankai Trough was successful, and therefore, highly sensitive strain measurement is now possible in a seismically active area.

AB - A high-sensitivity volumetric strainmeter has been installed into the C0010 borehole observatory using the drilling vessel (D/ V) Chikyu during the Expedition 365 cruise in the Nankai Trough, Japan. At this location, crustal deformation occurs in association with large interplate earthquakes. However, strong Kuroshio ocean currents cause vortex-induced vibrations (VIVs) in the region, which can cause fatal damage to the strainmeter. Therefore, laboratory vibration tests were performed prior to installation to confirm that the antivibration mechanism inside the strainmeter was functional against the severe vibrations during installation. VIV was measured prior to installing the strainmeter into the C0010A borehole using accelerometers at the installation site. The results indicated that the VIV were within the specification of the antivibration mechanism. This meant that installation of the strainmeter into the borehole was possible. To maximize sensor sensitivity, it is extremely important to ensure mechanical coupling of the strainmeter with the borehole wall by cementing operation after installation. The cementing process was confirmed using a pressure recording device incorporated within the strainmeter. Pressure data clearly showed that seawater had been displaced with cement slurry. Data from the strainmeter clearly showed tidal waveforms, which are comparable to those of pressure data recorded by a borehole pressure sensor installed at approximately the same depth. Accuracies of the strain data were validated through the procedure. They suggest that the first installation of the ocean borehole strainmeter in the Nankai Trough was successful, and therefore, highly sensitive strain measurement is now possible in a seismically active area.

UR - http://www.scopus.com/inward/record.url?scp=85050406820&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050406820&partnerID=8YFLogxK

U2 - 10.4031/MTSJ.52.3.2

DO - 10.4031/MTSJ.52.3.2

M3 - Article

VL - 52

SP - 128

EP - 137

JO - Marine Technology Society Journal

JF - Marine Technology Society Journal

SN - 0025-3324

IS - 3

ER -