Integrated decision and control of human-engineered complex systems

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

This paper presents a comprehensive decision and control strategy for human-engineered complex systems to achieve simultaneously the following objectives: (i) high-performance with quality assurance; (ii) reliability and structural durability with extended service life and (iii) operability over a wide range. Results from several systems-theoretic disciplines, such as probabilistic robust control (PRC), damage mitigating control (DMC), health and usage monitoring (HUM) and discrete event supervisory (DES) decision and control have been synergistically combined to achieve the above goal. The proposed decision and control system is hierarchically structured with two-tier architecture. The lower tier incorporates continuously-varying control that is designed using a combination of PRC and DMC, and the upper tier is designed to provide information and intelligence through DES decision and control that monitors the system response for detection and mitigation of anomalous behaviour, performance degradation and potential degradation of structural durability. To assure desired quality at permissible levels of risk as well as under different operating conditions, the PRC at the lower tier makes a trade off between robustness and performance, while damage mitigation in critical structures is achieved via DMC that also facilitates health and usage monitoring of the complex system. Based on the information derived from the observed time series data, the DES decision and control at the upper tier may decide to switch, in real time, to one control module from another in order to satisfy the specified performance and safety requirements. The switching actions are executed at the lower tier. The integrated system, including the proposed decision and control architecture, has been tested and validated on a rotorcraft simulation test bed.

Original languageEnglish (US)
Pages (from-to)275-294
Number of pages20
JournalInternational Journal of General Systems
Volume35
Issue number3
DOIs
StatePublished - Jun 1 2006

Fingerprint

Large scale systems
Complex Systems
Discrete Event
Damage
Robust Control
Robust control
Durability
Health
Degradation
Monitoring
Human
Decision System
Quality Assurance
Integrated System
Time Series Data
Testbed
Quality assurance
Anomalous
Control Strategy
Service life

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Theoretical Computer Science
  • Information Systems
  • Modeling and Simulation
  • Computer Science Applications

Cite this

@article{d76a589106b141e1ade3fa550391530a,
title = "Integrated decision and control of human-engineered complex systems",
abstract = "This paper presents a comprehensive decision and control strategy for human-engineered complex systems to achieve simultaneously the following objectives: (i) high-performance with quality assurance; (ii) reliability and structural durability with extended service life and (iii) operability over a wide range. Results from several systems-theoretic disciplines, such as probabilistic robust control (PRC), damage mitigating control (DMC), health and usage monitoring (HUM) and discrete event supervisory (DES) decision and control have been synergistically combined to achieve the above goal. The proposed decision and control system is hierarchically structured with two-tier architecture. The lower tier incorporates continuously-varying control that is designed using a combination of PRC and DMC, and the upper tier is designed to provide information and intelligence through DES decision and control that monitors the system response for detection and mitigation of anomalous behaviour, performance degradation and potential degradation of structural durability. To assure desired quality at permissible levels of risk as well as under different operating conditions, the PRC at the lower tier makes a trade off between robustness and performance, while damage mitigation in critical structures is achieved via DMC that also facilitates health and usage monitoring of the complex system. Based on the information derived from the observed time series data, the DES decision and control at the upper tier may decide to switch, in real time, to one control module from another in order to satisfy the specified performance and safety requirements. The switching actions are executed at the lower tier. The integrated system, including the proposed decision and control architecture, has been tested and validated on a rotorcraft simulation test bed.",
author = "Tolani, {D. K.} and Asok Ray and Horn, {Joseph Francis}",
year = "2006",
month = "6",
day = "1",
doi = "10.1080/03081070600660962",
language = "English (US)",
volume = "35",
pages = "275--294",
journal = "International Journal of General Systems",
issn = "0308-1079",
publisher = "Taylor and Francis Ltd.",
number = "3",

}

Integrated decision and control of human-engineered complex systems. / Tolani, D. K.; Ray, Asok; Horn, Joseph Francis.

In: International Journal of General Systems, Vol. 35, No. 3, 01.06.2006, p. 275-294.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Integrated decision and control of human-engineered complex systems

AU - Tolani, D. K.

AU - Ray, Asok

AU - Horn, Joseph Francis

PY - 2006/6/1

Y1 - 2006/6/1

N2 - This paper presents a comprehensive decision and control strategy for human-engineered complex systems to achieve simultaneously the following objectives: (i) high-performance with quality assurance; (ii) reliability and structural durability with extended service life and (iii) operability over a wide range. Results from several systems-theoretic disciplines, such as probabilistic robust control (PRC), damage mitigating control (DMC), health and usage monitoring (HUM) and discrete event supervisory (DES) decision and control have been synergistically combined to achieve the above goal. The proposed decision and control system is hierarchically structured with two-tier architecture. The lower tier incorporates continuously-varying control that is designed using a combination of PRC and DMC, and the upper tier is designed to provide information and intelligence through DES decision and control that monitors the system response for detection and mitigation of anomalous behaviour, performance degradation and potential degradation of structural durability. To assure desired quality at permissible levels of risk as well as under different operating conditions, the PRC at the lower tier makes a trade off between robustness and performance, while damage mitigation in critical structures is achieved via DMC that also facilitates health and usage monitoring of the complex system. Based on the information derived from the observed time series data, the DES decision and control at the upper tier may decide to switch, in real time, to one control module from another in order to satisfy the specified performance and safety requirements. The switching actions are executed at the lower tier. The integrated system, including the proposed decision and control architecture, has been tested and validated on a rotorcraft simulation test bed.

AB - This paper presents a comprehensive decision and control strategy for human-engineered complex systems to achieve simultaneously the following objectives: (i) high-performance with quality assurance; (ii) reliability and structural durability with extended service life and (iii) operability over a wide range. Results from several systems-theoretic disciplines, such as probabilistic robust control (PRC), damage mitigating control (DMC), health and usage monitoring (HUM) and discrete event supervisory (DES) decision and control have been synergistically combined to achieve the above goal. The proposed decision and control system is hierarchically structured with two-tier architecture. The lower tier incorporates continuously-varying control that is designed using a combination of PRC and DMC, and the upper tier is designed to provide information and intelligence through DES decision and control that monitors the system response for detection and mitigation of anomalous behaviour, performance degradation and potential degradation of structural durability. To assure desired quality at permissible levels of risk as well as under different operating conditions, the PRC at the lower tier makes a trade off between robustness and performance, while damage mitigation in critical structures is achieved via DMC that also facilitates health and usage monitoring of the complex system. Based on the information derived from the observed time series data, the DES decision and control at the upper tier may decide to switch, in real time, to one control module from another in order to satisfy the specified performance and safety requirements. The switching actions are executed at the lower tier. The integrated system, including the proposed decision and control architecture, has been tested and validated on a rotorcraft simulation test bed.

UR - http://www.scopus.com/inward/record.url?scp=33745823534&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745823534&partnerID=8YFLogxK

U2 - 10.1080/03081070600660962

DO - 10.1080/03081070600660962

M3 - Article

VL - 35

SP - 275

EP - 294

JO - International Journal of General Systems

JF - International Journal of General Systems

SN - 0308-1079

IS - 3

ER -