Interfacial stress state present in a "thin-slice" fibre push-out test

M. N. Kallas, D. A. Koss, H. T. Hahn, J. R. Hellmann

Research output: Contribution to journalArticle

77 Citations (Scopus)

Abstract

An analysis of the stress distributions along the fibre-matrix interface in a "thin-slice" fibre push-out test is presented for selected test geometries. For the small specimen thicknesses often required to displace large-diameter fibres with high interfacial shear strengths, finite element analysis indicates that large bending stresses may be present. The magnitude of these stresses and their spatial distribution can be very sensitive to the test configuration. For certain test geometries, the specimen configuration itself may alter the interfacial failure process from one which initiates due to a maximum in shear stress near the top surface adjacent to the indentor, to one which involves mixed mode crack growth up from the bottom surface and/or yielding within the matrix near the interface.

Original languageEnglish (US)
Pages (from-to)3821-3826
Number of pages6
JournalJournal of Materials Science
Volume27
Issue number14
DOIs
StatePublished - Jan 1 1992

Fingerprint

Fibers
Geometry
Shear strength
Spatial distribution
Stress concentration
Shear stress
Crack propagation
Finite element method

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Kallas, M. N. ; Koss, D. A. ; Hahn, H. T. ; Hellmann, J. R. / Interfacial stress state present in a "thin-slice" fibre push-out test. In: Journal of Materials Science. 1992 ; Vol. 27, No. 14. pp. 3821-3826.
@article{a96bcdd70d2f4d83b37e2c8e5ef3ce14,
title = "Interfacial stress state present in a {"}thin-slice{"} fibre push-out test",
abstract = "An analysis of the stress distributions along the fibre-matrix interface in a {"}thin-slice{"} fibre push-out test is presented for selected test geometries. For the small specimen thicknesses often required to displace large-diameter fibres with high interfacial shear strengths, finite element analysis indicates that large bending stresses may be present. The magnitude of these stresses and their spatial distribution can be very sensitive to the test configuration. For certain test geometries, the specimen configuration itself may alter the interfacial failure process from one which initiates due to a maximum in shear stress near the top surface adjacent to the indentor, to one which involves mixed mode crack growth up from the bottom surface and/or yielding within the matrix near the interface.",
author = "Kallas, {M. N.} and Koss, {D. A.} and Hahn, {H. T.} and Hellmann, {J. R.}",
year = "1992",
month = "1",
day = "1",
doi = "10.1007/BF00545464",
language = "English (US)",
volume = "27",
pages = "3821--3826",
journal = "Journal of Materials Science",
issn = "0022-2461",
publisher = "Springer Netherlands",
number = "14",

}

Interfacial stress state present in a "thin-slice" fibre push-out test. / Kallas, M. N.; Koss, D. A.; Hahn, H. T.; Hellmann, J. R.

In: Journal of Materials Science, Vol. 27, No. 14, 01.01.1992, p. 3821-3826.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Interfacial stress state present in a "thin-slice" fibre push-out test

AU - Kallas, M. N.

AU - Koss, D. A.

AU - Hahn, H. T.

AU - Hellmann, J. R.

PY - 1992/1/1

Y1 - 1992/1/1

N2 - An analysis of the stress distributions along the fibre-matrix interface in a "thin-slice" fibre push-out test is presented for selected test geometries. For the small specimen thicknesses often required to displace large-diameter fibres with high interfacial shear strengths, finite element analysis indicates that large bending stresses may be present. The magnitude of these stresses and their spatial distribution can be very sensitive to the test configuration. For certain test geometries, the specimen configuration itself may alter the interfacial failure process from one which initiates due to a maximum in shear stress near the top surface adjacent to the indentor, to one which involves mixed mode crack growth up from the bottom surface and/or yielding within the matrix near the interface.

AB - An analysis of the stress distributions along the fibre-matrix interface in a "thin-slice" fibre push-out test is presented for selected test geometries. For the small specimen thicknesses often required to displace large-diameter fibres with high interfacial shear strengths, finite element analysis indicates that large bending stresses may be present. The magnitude of these stresses and their spatial distribution can be very sensitive to the test configuration. For certain test geometries, the specimen configuration itself may alter the interfacial failure process from one which initiates due to a maximum in shear stress near the top surface adjacent to the indentor, to one which involves mixed mode crack growth up from the bottom surface and/or yielding within the matrix near the interface.

UR - http://www.scopus.com/inward/record.url?scp=0026797522&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026797522&partnerID=8YFLogxK

U2 - 10.1007/BF00545464

DO - 10.1007/BF00545464

M3 - Article

VL - 27

SP - 3821

EP - 3826

JO - Journal of Materials Science

JF - Journal of Materials Science

SN - 0022-2461

IS - 14

ER -