Investigation of fluidized bed agglomerate growth process using simulations and SEM-EDX characterization of laboratory-generated agglomerates

Aditi B. Khadilkar, Peter L. Rozelle, Sarma V. Pisupati

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

This study elucidates the sequential progression of agglomerate growth in fluidized beds through an investigation of physics and chemistry of particle-particle interaction. In fluidized bed gasification and combustion systems, agglomeration occurs by sticking of ash particles that are wetted by slag-liquid. Penn State has developed an agglomeration modeling methodology that considers non-uniform temperature, gaseous atmosphere and heterogeneity in ash chemical composition to predict slag-liquid formation and agglomerate growth rate. Simulations performed on three high rank coals with a consideration of these heterogeneous conditions, along with a microscopic (SEM) particle-level analysis of agglomerates facilitated an understanding of steps involved in their formation. The results of this study indicated that agglomerate growth in fluidized bed systems is initiated at the particle-level by low-melting components rich in iron- and calcium-based minerals. Agglomeration can begin at lower temperatures than the fluidized bed operating temperatures of 850 °C and the severity of agglomerate growth issues can be identified based on the slag-liquid level in the system. Understanding the stages involved in the process of agglomerate growth discussed in this paper can help develop early detection methods and mitigation strategies.

Original languageEnglish (US)
Pages (from-to)172-185
Number of pages14
JournalChemical Engineering Science
Volume184
DOIs
StatePublished - Jul 20 2018

Fingerprint

Ashes
Fluidized beds
Energy dispersive spectroscopy
Slags
Scanning electron microscopy
Agglomeration
Liquids
Particle interactions
Coal
Gasification
Temperature
Minerals
Calcium
Melting
Iron
Physics
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering

Cite this

@article{ed13954594e4417dad4b20ca1eece7a7,
title = "Investigation of fluidized bed agglomerate growth process using simulations and SEM-EDX characterization of laboratory-generated agglomerates",
abstract = "This study elucidates the sequential progression of agglomerate growth in fluidized beds through an investigation of physics and chemistry of particle-particle interaction. In fluidized bed gasification and combustion systems, agglomeration occurs by sticking of ash particles that are wetted by slag-liquid. Penn State has developed an agglomeration modeling methodology that considers non-uniform temperature, gaseous atmosphere and heterogeneity in ash chemical composition to predict slag-liquid formation and agglomerate growth rate. Simulations performed on three high rank coals with a consideration of these heterogeneous conditions, along with a microscopic (SEM) particle-level analysis of agglomerates facilitated an understanding of steps involved in their formation. The results of this study indicated that agglomerate growth in fluidized bed systems is initiated at the particle-level by low-melting components rich in iron- and calcium-based minerals. Agglomeration can begin at lower temperatures than the fluidized bed operating temperatures of 850 °C and the severity of agglomerate growth issues can be identified based on the slag-liquid level in the system. Understanding the stages involved in the process of agglomerate growth discussed in this paper can help develop early detection methods and mitigation strategies.",
author = "Khadilkar, {Aditi B.} and Rozelle, {Peter L.} and Pisupati, {Sarma V.}",
year = "2018",
month = "7",
day = "20",
doi = "10.1016/j.ces.2018.03.035",
language = "English (US)",
volume = "184",
pages = "172--185",
journal = "Chemical Engineering Science",
issn = "0009-2509",
publisher = "Elsevier BV",

}

Investigation of fluidized bed agglomerate growth process using simulations and SEM-EDX characterization of laboratory-generated agglomerates. / Khadilkar, Aditi B.; Rozelle, Peter L.; Pisupati, Sarma V.

In: Chemical Engineering Science, Vol. 184, 20.07.2018, p. 172-185.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Investigation of fluidized bed agglomerate growth process using simulations and SEM-EDX characterization of laboratory-generated agglomerates

AU - Khadilkar, Aditi B.

AU - Rozelle, Peter L.

AU - Pisupati, Sarma V.

PY - 2018/7/20

Y1 - 2018/7/20

N2 - This study elucidates the sequential progression of agglomerate growth in fluidized beds through an investigation of physics and chemistry of particle-particle interaction. In fluidized bed gasification and combustion systems, agglomeration occurs by sticking of ash particles that are wetted by slag-liquid. Penn State has developed an agglomeration modeling methodology that considers non-uniform temperature, gaseous atmosphere and heterogeneity in ash chemical composition to predict slag-liquid formation and agglomerate growth rate. Simulations performed on three high rank coals with a consideration of these heterogeneous conditions, along with a microscopic (SEM) particle-level analysis of agglomerates facilitated an understanding of steps involved in their formation. The results of this study indicated that agglomerate growth in fluidized bed systems is initiated at the particle-level by low-melting components rich in iron- and calcium-based minerals. Agglomeration can begin at lower temperatures than the fluidized bed operating temperatures of 850 °C and the severity of agglomerate growth issues can be identified based on the slag-liquid level in the system. Understanding the stages involved in the process of agglomerate growth discussed in this paper can help develop early detection methods and mitigation strategies.

AB - This study elucidates the sequential progression of agglomerate growth in fluidized beds through an investigation of physics and chemistry of particle-particle interaction. In fluidized bed gasification and combustion systems, agglomeration occurs by sticking of ash particles that are wetted by slag-liquid. Penn State has developed an agglomeration modeling methodology that considers non-uniform temperature, gaseous atmosphere and heterogeneity in ash chemical composition to predict slag-liquid formation and agglomerate growth rate. Simulations performed on three high rank coals with a consideration of these heterogeneous conditions, along with a microscopic (SEM) particle-level analysis of agglomerates facilitated an understanding of steps involved in their formation. The results of this study indicated that agglomerate growth in fluidized bed systems is initiated at the particle-level by low-melting components rich in iron- and calcium-based minerals. Agglomeration can begin at lower temperatures than the fluidized bed operating temperatures of 850 °C and the severity of agglomerate growth issues can be identified based on the slag-liquid level in the system. Understanding the stages involved in the process of agglomerate growth discussed in this paper can help develop early detection methods and mitigation strategies.

UR - http://www.scopus.com/inward/record.url?scp=85044785796&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85044785796&partnerID=8YFLogxK

U2 - 10.1016/j.ces.2018.03.035

DO - 10.1016/j.ces.2018.03.035

M3 - Article

AN - SCOPUS:85044785796

VL - 184

SP - 172

EP - 185

JO - Chemical Engineering Science

JF - Chemical Engineering Science

SN - 0009-2509

ER -