Investigation of velocity profiles for effusion cooling of a combustor liner

J. J. Scrittore, Karen Ann Thole, S. W. Burd

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Scopus citations

Abstract

Effusion cooling of combustor liners for gas turbine engines is quite challenging and necessary to prevent thermal distress of the combustor liner walls. The flow and thermal patterns in the cooling layer are affected by the closely spaced film-cooling holes. It is important to fully document how the film layer behaves with a full-coverage cooling scheme to gain an understanding into surface cooling phenomena. This paper discusses experimental results from a combustor simulator tested in a low-speed wind tunnel. Engine representative, non-dimensional coolant flows were tested for a full-coverage effusion plate. Laser Doppler velocimetry was used to measure the flow characteristics of the cooling layer. These experiments indicate that the full-coverage film cooling flow has unique and scaleable velocity profiles that result from the closely spaced effusion holes. A parametric study of the cooling flow behavior illustrates the complex nature of the film flow and how it affects cooling performance.

Original languageEnglish (US)
Title of host publicationProceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air
Pages503-512
Number of pages10
DOIs
StatePublished - Nov 15 2006
Event2006 ASME 51st Turbo Expo - Barcelona, Spain
Duration: May 6 2006May 11 2006

Publication series

NameProceedings of the ASME Turbo Expo
Volume3 PART A

Other

Other2006 ASME 51st Turbo Expo
CountrySpain
CityBarcelona
Period5/6/065/11/06

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Investigation of velocity profiles for effusion cooling of a combustor liner'. Together they form a unique fingerprint.

  • Cite this

    Scrittore, J. J., Thole, K. A., & Burd, S. W. (2006). Investigation of velocity profiles for effusion cooling of a combustor liner. In Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air (pp. 503-512). (Proceedings of the ASME Turbo Expo; Vol. 3 PART A). https://doi.org/10.1115/GT2006-90532