Lithospheric modeling of the Ordovician foreland basin in the Puna of northwestern Argentina: On the influence of arc loading on foreland basin formation

Heinrich Bahlburg, Kevin Patrick Furlong

Research output: Contribution to journalArticle

31 Citations (Scopus)

Abstract

In a qualitative sedimentological model of the Ordovician basin in the Puna of northwestern Argentina, the temporal and spatial distribution of predominantly marine volcanoclastic facies was interpreted to indicate a basin evolution from extensionally related subsidence to that driven by crustal down flexure. Sedimentological data were taken to reflect a Middle Ordovician eastward thrusting of an extinct Early Ordovician arc over part of its back-arc basin in the course of the collision of the allochthonous Arequipa Massif terrane with the South American margin. To test the original qualitative sedimentological interpretation of the Puna basin, an infinite beam elastic plate loading model was applied using the constraints of the field data. Contrary to the original interpretation, results show that the Puna basin can be modeled as resulting entirely from the effects of lithospheric loading caused by the progressive contruction of a static load, i.e., a volcanic arc. Two loading events, one in the Early Ordovician, and one in the Llanvirnian, with tectonic load thicknesses of 6000 and 2000 m, respectively, best explain the observed basin geometry. The onlap patterns on the distal margin on the peripheral bulge are reproduced well using a flexural rigidity of 1022 Nm representing an equivalent elastic thickness of 14 km of the loaded plate. Higher values for the flexural rigidity are considered unlikely, as they result in an enhanced peripheral bulge which uplifts marine near-shore deposits on the distal margin to unrealistic subaereal positions. The model results fit a foreland basin development where crustal thickening was caused by the construction of a static volcanic arc on a previously passive margin. Modeling the movement of thrust loads over parts of the basin according to traditional models of foreland basin formation in this case leads to model results which are inconsistent with field data, even when moderate thrust rates are considered.

Original languageEnglish (US)
Pages (from-to)245-258
Number of pages14
JournalTectonophysics
Volume259
Issue number1-3 SPEC. ISS.
StatePublished - Jun 30 1996

Fingerprint

Argentina
foreland basin
basin evolution
Ordovician
arcs
basin
modeling
margins
rigidity
island arc
thrust
Llanvirnian
thrust loads
volcanology
crustal thickening
flexure
passive margin
temporal distribution
static loads
terrane

All Science Journal Classification (ASJC) codes

  • Earth-Surface Processes
  • Geophysics

Cite this

@article{2210281465524414918744e53ef2b23b,
title = "Lithospheric modeling of the Ordovician foreland basin in the Puna of northwestern Argentina: On the influence of arc loading on foreland basin formation",
abstract = "In a qualitative sedimentological model of the Ordovician basin in the Puna of northwestern Argentina, the temporal and spatial distribution of predominantly marine volcanoclastic facies was interpreted to indicate a basin evolution from extensionally related subsidence to that driven by crustal down flexure. Sedimentological data were taken to reflect a Middle Ordovician eastward thrusting of an extinct Early Ordovician arc over part of its back-arc basin in the course of the collision of the allochthonous Arequipa Massif terrane with the South American margin. To test the original qualitative sedimentological interpretation of the Puna basin, an infinite beam elastic plate loading model was applied using the constraints of the field data. Contrary to the original interpretation, results show that the Puna basin can be modeled as resulting entirely from the effects of lithospheric loading caused by the progressive contruction of a static load, i.e., a volcanic arc. Two loading events, one in the Early Ordovician, and one in the Llanvirnian, with tectonic load thicknesses of 6000 and 2000 m, respectively, best explain the observed basin geometry. The onlap patterns on the distal margin on the peripheral bulge are reproduced well using a flexural rigidity of 1022 Nm representing an equivalent elastic thickness of 14 km of the loaded plate. Higher values for the flexural rigidity are considered unlikely, as they result in an enhanced peripheral bulge which uplifts marine near-shore deposits on the distal margin to unrealistic subaereal positions. The model results fit a foreland basin development where crustal thickening was caused by the construction of a static volcanic arc on a previously passive margin. Modeling the movement of thrust loads over parts of the basin according to traditional models of foreland basin formation in this case leads to model results which are inconsistent with field data, even when moderate thrust rates are considered.",
author = "Heinrich Bahlburg and Furlong, {Kevin Patrick}",
year = "1996",
month = "6",
day = "30",
language = "English (US)",
volume = "259",
pages = "245--258",
journal = "Tectonophysics",
issn = "0040-1951",
publisher = "Elsevier",
number = "1-3 SPEC. ISS.",

}

Lithospheric modeling of the Ordovician foreland basin in the Puna of northwestern Argentina : On the influence of arc loading on foreland basin formation. / Bahlburg, Heinrich; Furlong, Kevin Patrick.

In: Tectonophysics, Vol. 259, No. 1-3 SPEC. ISS., 30.06.1996, p. 245-258.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Lithospheric modeling of the Ordovician foreland basin in the Puna of northwestern Argentina

T2 - On the influence of arc loading on foreland basin formation

AU - Bahlburg, Heinrich

AU - Furlong, Kevin Patrick

PY - 1996/6/30

Y1 - 1996/6/30

N2 - In a qualitative sedimentological model of the Ordovician basin in the Puna of northwestern Argentina, the temporal and spatial distribution of predominantly marine volcanoclastic facies was interpreted to indicate a basin evolution from extensionally related subsidence to that driven by crustal down flexure. Sedimentological data were taken to reflect a Middle Ordovician eastward thrusting of an extinct Early Ordovician arc over part of its back-arc basin in the course of the collision of the allochthonous Arequipa Massif terrane with the South American margin. To test the original qualitative sedimentological interpretation of the Puna basin, an infinite beam elastic plate loading model was applied using the constraints of the field data. Contrary to the original interpretation, results show that the Puna basin can be modeled as resulting entirely from the effects of lithospheric loading caused by the progressive contruction of a static load, i.e., a volcanic arc. Two loading events, one in the Early Ordovician, and one in the Llanvirnian, with tectonic load thicknesses of 6000 and 2000 m, respectively, best explain the observed basin geometry. The onlap patterns on the distal margin on the peripheral bulge are reproduced well using a flexural rigidity of 1022 Nm representing an equivalent elastic thickness of 14 km of the loaded plate. Higher values for the flexural rigidity are considered unlikely, as they result in an enhanced peripheral bulge which uplifts marine near-shore deposits on the distal margin to unrealistic subaereal positions. The model results fit a foreland basin development where crustal thickening was caused by the construction of a static volcanic arc on a previously passive margin. Modeling the movement of thrust loads over parts of the basin according to traditional models of foreland basin formation in this case leads to model results which are inconsistent with field data, even when moderate thrust rates are considered.

AB - In a qualitative sedimentological model of the Ordovician basin in the Puna of northwestern Argentina, the temporal and spatial distribution of predominantly marine volcanoclastic facies was interpreted to indicate a basin evolution from extensionally related subsidence to that driven by crustal down flexure. Sedimentological data were taken to reflect a Middle Ordovician eastward thrusting of an extinct Early Ordovician arc over part of its back-arc basin in the course of the collision of the allochthonous Arequipa Massif terrane with the South American margin. To test the original qualitative sedimentological interpretation of the Puna basin, an infinite beam elastic plate loading model was applied using the constraints of the field data. Contrary to the original interpretation, results show that the Puna basin can be modeled as resulting entirely from the effects of lithospheric loading caused by the progressive contruction of a static load, i.e., a volcanic arc. Two loading events, one in the Early Ordovician, and one in the Llanvirnian, with tectonic load thicknesses of 6000 and 2000 m, respectively, best explain the observed basin geometry. The onlap patterns on the distal margin on the peripheral bulge are reproduced well using a flexural rigidity of 1022 Nm representing an equivalent elastic thickness of 14 km of the loaded plate. Higher values for the flexural rigidity are considered unlikely, as they result in an enhanced peripheral bulge which uplifts marine near-shore deposits on the distal margin to unrealistic subaereal positions. The model results fit a foreland basin development where crustal thickening was caused by the construction of a static volcanic arc on a previously passive margin. Modeling the movement of thrust loads over parts of the basin according to traditional models of foreland basin formation in this case leads to model results which are inconsistent with field data, even when moderate thrust rates are considered.

UR - http://www.scopus.com/inward/record.url?scp=0030478760&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030478760&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0030478760

VL - 259

SP - 245

EP - 258

JO - Tectonophysics

JF - Tectonophysics

SN - 0040-1951

IS - 1-3 SPEC. ISS.

ER -