Low loss tungsten-based electrode technology for microwave frequency BST varactors

J. P. Maria, B. Boyette, A. Kingon, C. Ragaglia, G. Stauf

Research output: Contribution to journalArticlepeer-review

5 Scopus citations

Abstract

Composite metallization stacks consisting of 1.5 μm W layers and 0.1 μm Ir layers have been developed for low series resistance electrode applications. These hybrid metallization layers are compatible with barium strontium titanate deposition and standard patterning/etching procedures. The multilayer stacks were prepared for use as bottom electrodes in microwave varactors based upon the electrically tunable dielectric barium strontium titanate. These low resistivity layers are critical for realizing low insertion loss devices and overcome difficulties associated with delamination or hillocking in traditional noble metal layers. Controlling the oxygen content during BST deposition was necessary to achieve high-quality BST and a stable electrode stack. Using these metallization stacks and optimized deposition conditions BST films with tan δ values below 0.007 and tunabilities of 2: 1 were realized. These properties are comparable to those measured on typical Pt/BST/Pt/SiO2/Si capacitors. Finally a combination of reactive ion and wet chemical etching were used to demonstrate that the thick hybrid metallization layers are patternable using routine and manufacturable process methods.

Original languageEnglish (US)
Pages (from-to)75-81
Number of pages7
JournalJournal of Electroceramics
Volume14
Issue number1
DOIs
StatePublished - Jan 2005

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Condensed Matter Physics
  • Mechanics of Materials
  • Materials Chemistry
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Low loss tungsten-based electrode technology for microwave frequency BST varactors'. Together they form a unique fingerprint.

Cite this