High-power ceramics of the composition 0.8Pb(Zr0.5Ti 0.5)O3-0.2Pb[(Zn0.8Ni0.2) 1/3Nb2/3]O3 (0.8PZT-0.2PZNN) + 0.5 wt% MnO 2 have excellent piezoelectric and dielectric properties such as d33 = 320 pC/N, ε33T/ε0 = 1227, kp = 0.54, and Qm = 1265. However, the sintering temperature of this composition is high, approximately 1200°C, restricting the use of cheap base metal electrodes in the fabrication of multilayer components. In this study, we provide a solution to this problem and report a low sintering temperature high-power composition in a PZT-PZNN system. CuO and Al2O3 were selected as sintering agents. It was found that the addition of CuO can reduce the sintering temperature to 920°C, but it can also significantly reduce the piezoelectric properties. The reduction of Qm magnitude was 81% when 0.5 wt% CuO was added. The addition of Al2O3 as a sintering agent was found to improve Q m magnitude but significant reductions in piezoelectric and dielectric properties were observed. The addition of excess ZnO and NiO was found to improve the density and piezoelectric properties, but it was also found to reduce Qm magnitude. Consequently, the optimization of the concentration of the sintering agents was carried out, and the optimized low sintering temperature high-power composition was found to be 0.875Pb(Zr 0.5Ti0.5)O3-0.125Pb[(Zn0.8Ni 0.2)1.5/3Nb2/3]O3 + 0.5 wt% MnO 2 + 0.2wt% CuO + 0.3 wt% Al2O3. The piezo-electric properties of the specimens of this composition sintered at 920°C were found to be kp =0.581, Qm = 809, d 33 = 345 pC/N, ε3T/ε0 = 1345, and Tc = 330°C.
|Original language||English (US)|
|Number of pages||8|
|Journal||Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers|
|State||Published - Mar 2005|
All Science Journal Classification (ASJC) codes
- Physics and Astronomy(all)