Manipulating the orientation at end of fill

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Orientation of polymer chains has been shown to have a major effect on component properties. The chain orientation at the end of fill of a component is different from most other areas. Overflows have been used in various areas of the plastics industry to improve weld line strength and provide a more consistent gas channel in gas-assist molding. This study will investigate if the use of overflows to change the orientation of the polymer chains provides a more capable molding condition.

Original languageEnglish (US)
Title of host publicationSociety of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings
Pages2596-2599
Number of pages4
Volume5
StatePublished - 2007
EventSociety of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007 - Cincinnati, OH, United States
Duration: May 6 2007May 11 2007

Other

OtherSociety of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007
CountryUnited States
CityCincinnati, OH
Period5/6/075/11/07

Fingerprint

Molding
Plastics industry
Polymers
Gases
Welds

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Young, B. (2007). Manipulating the orientation at end of fill. In Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings (Vol. 5, pp. 2596-2599)
Young, Brian. / Manipulating the orientation at end of fill. Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5 2007. pp. 2596-2599
@inproceedings{5e6227ec836b4ebbbf4fb17972527e0e,
title = "Manipulating the orientation at end of fill",
abstract = "Orientation of polymer chains has been shown to have a major effect on component properties. The chain orientation at the end of fill of a component is different from most other areas. Overflows have been used in various areas of the plastics industry to improve weld line strength and provide a more consistent gas channel in gas-assist molding. This study will investigate if the use of overflows to change the orientation of the polymer chains provides a more capable molding condition.",
author = "Brian Young",
year = "2007",
language = "English (US)",
volume = "5",
pages = "2596--2599",
booktitle = "Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings",

}

Young, B 2007, Manipulating the orientation at end of fill. in Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. vol. 5, pp. 2596-2599, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Cincinnati, OH, United States, 5/6/07.

Manipulating the orientation at end of fill. / Young, Brian.

Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5 2007. p. 2596-2599.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Manipulating the orientation at end of fill

AU - Young, Brian

PY - 2007

Y1 - 2007

N2 - Orientation of polymer chains has been shown to have a major effect on component properties. The chain orientation at the end of fill of a component is different from most other areas. Overflows have been used in various areas of the plastics industry to improve weld line strength and provide a more consistent gas channel in gas-assist molding. This study will investigate if the use of overflows to change the orientation of the polymer chains provides a more capable molding condition.

AB - Orientation of polymer chains has been shown to have a major effect on component properties. The chain orientation at the end of fill of a component is different from most other areas. Overflows have been used in various areas of the plastics industry to improve weld line strength and provide a more consistent gas channel in gas-assist molding. This study will investigate if the use of overflows to change the orientation of the polymer chains provides a more capable molding condition.

UR - http://www.scopus.com/inward/record.url?scp=34648823525&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34648823525&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:34648823525

VL - 5

SP - 2596

EP - 2599

BT - Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings

ER -

Young B. Manipulating the orientation at end of fill. In Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. Vol. 5. 2007. p. 2596-2599