Manufacturing technology development for composite marine impellers

Piet Van Dine, Jeff Hall, Kevin L. Koudela, Greg Dillon

Research output: Contribution to journalConference articlepeer-review

Abstract

Manufacturing technologies for the production of metallic high precision marine impeller designs have been successfully developed. The high degree of precision required to meet the performance criteria was achieved by 5-Axis machining of Powder Metal Hot Isostatically Pressed (PM HIP) billets into shroud and hub/blade sections, which are subsequently electron beam welded together and finish machined. This technique yields finished tolerances within 0.015 inches of the design. While the approach has been successful, the costs associated with the manufacture of an impeller are high. Alternative manufacturing techniques, such as precision casting and one piece molding of composite have been evaluated and prototype parts manufactured. Based on an assessment of technical requirements at that time these processes were concluded to be inadequate for providing acceptable part tolerances (given subsequently acquired information and recent unrelated developments alternative metal manufacturing techniques may now be acceptable). In order to meet both cost and quality requirements, Electric Boat invented a segmented composite impeller manufacturing approach. Initial trials with this technique showed promise of acceptably replacing the baseline technology. The Office of Naval Research sponsored a program to bring this manufacturing technique to maturity under the ManTech program. This effort developed high precision rapid tooling techniques for Resin Transfer Molded parts that were corrected for mold and part shrinkage/distortion. These high precision parts were then assembled to form an impeller. This paper will describe the basic technique, the efforts made to improve the tolerances, and the manufacturing process.

Original languageEnglish (US)
Pages (from-to)1359-1373
Number of pages15
JournalInternational SAMPE Symposium and Exhibition (Proceedings)
Volume50
StatePublished - Dec 1 2005
Event50th International SAMPE Symposium and Exhibition - Long Beach, CA, United States
Duration: May 1 2005May 5 2005

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Manufacturing technology development for composite marine impellers'. Together they form a unique fingerprint.

Cite this