Metallic forging using electrical flow as an alternative to warm/hot working

Timothy A. Perkins, Thomas J. Kronenberger, John Timothy Roth

Research output: Contribution to journalArticle

116 Citations (Scopus)

Abstract

Manufacturing processes (e.g., forging, rolling, extrusion, and forming) rely on heat to reduce the forces associated with fabricating parts. However, due to the negative implications associated with hot working, another more efficient means of applying energy is desired. This paper investigates material property changes of various metals (aluminum, copper, iron, and titanium based alloys) in response to the flow of electricity. Theory involving electromigration and electroplasticity is examined and the implications thereof are analyzed. It is shown that, using electrical current, flow stresses are reduced, resulting in a lower specific energy for open-die forging. It is also shown that an applied electrical current increases the forgeability of materials, allowing greater deformation prior to cracking. Moreover, the changes caused by the flow of electricity are significantly greater than those explained by resistive heating. Additionally, elastic recovery is decreased when using electrical flow during deformation. Finally, for most materials, these effects were dependent on strain rate. Overall, this work demonstrates that substantial increases in the forgeability of metals are achieved by deforming the material while applying an electrical current. These improvements exceed those achieved through comparable increases in workpiece temperature and demonstrate that this method provides a viable alternative to warm/hot working.

Original languageEnglish (US)
Pages (from-to)84-94
Number of pages11
JournalJournal of Manufacturing Science and Engineering, Transactions of the ASME
Volume129
Issue number1
DOIs
StatePublished - Feb 1 2007

Fingerprint

Hot working
Forging
Electricity
Electromigration
Metals
Plastic flow
Extrusion
Strain rate
Materials properties
Titanium
Iron
Copper
Aluminum
Heating
Recovery
Temperature

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

Cite this

@article{1b78b2b31b0d4efa98895f767b00c1e9,
title = "Metallic forging using electrical flow as an alternative to warm/hot working",
abstract = "Manufacturing processes (e.g., forging, rolling, extrusion, and forming) rely on heat to reduce the forces associated with fabricating parts. However, due to the negative implications associated with hot working, another more efficient means of applying energy is desired. This paper investigates material property changes of various metals (aluminum, copper, iron, and titanium based alloys) in response to the flow of electricity. Theory involving electromigration and electroplasticity is examined and the implications thereof are analyzed. It is shown that, using electrical current, flow stresses are reduced, resulting in a lower specific energy for open-die forging. It is also shown that an applied electrical current increases the forgeability of materials, allowing greater deformation prior to cracking. Moreover, the changes caused by the flow of electricity are significantly greater than those explained by resistive heating. Additionally, elastic recovery is decreased when using electrical flow during deformation. Finally, for most materials, these effects were dependent on strain rate. Overall, this work demonstrates that substantial increases in the forgeability of metals are achieved by deforming the material while applying an electrical current. These improvements exceed those achieved through comparable increases in workpiece temperature and demonstrate that this method provides a viable alternative to warm/hot working.",
author = "Perkins, {Timothy A.} and Kronenberger, {Thomas J.} and Roth, {John Timothy}",
year = "2007",
month = "2",
day = "1",
doi = "10.1115/1.2386164",
language = "English (US)",
volume = "129",
pages = "84--94",
journal = "Journal of Manufacturing Science and Engineering, Transactions of the ASME",
issn = "1087-1357",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "1",

}

Metallic forging using electrical flow as an alternative to warm/hot working. / Perkins, Timothy A.; Kronenberger, Thomas J.; Roth, John Timothy.

In: Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 129, No. 1, 01.02.2007, p. 84-94.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Metallic forging using electrical flow as an alternative to warm/hot working

AU - Perkins, Timothy A.

AU - Kronenberger, Thomas J.

AU - Roth, John Timothy

PY - 2007/2/1

Y1 - 2007/2/1

N2 - Manufacturing processes (e.g., forging, rolling, extrusion, and forming) rely on heat to reduce the forces associated with fabricating parts. However, due to the negative implications associated with hot working, another more efficient means of applying energy is desired. This paper investigates material property changes of various metals (aluminum, copper, iron, and titanium based alloys) in response to the flow of electricity. Theory involving electromigration and electroplasticity is examined and the implications thereof are analyzed. It is shown that, using electrical current, flow stresses are reduced, resulting in a lower specific energy for open-die forging. It is also shown that an applied electrical current increases the forgeability of materials, allowing greater deformation prior to cracking. Moreover, the changes caused by the flow of electricity are significantly greater than those explained by resistive heating. Additionally, elastic recovery is decreased when using electrical flow during deformation. Finally, for most materials, these effects were dependent on strain rate. Overall, this work demonstrates that substantial increases in the forgeability of metals are achieved by deforming the material while applying an electrical current. These improvements exceed those achieved through comparable increases in workpiece temperature and demonstrate that this method provides a viable alternative to warm/hot working.

AB - Manufacturing processes (e.g., forging, rolling, extrusion, and forming) rely on heat to reduce the forces associated with fabricating parts. However, due to the negative implications associated with hot working, another more efficient means of applying energy is desired. This paper investigates material property changes of various metals (aluminum, copper, iron, and titanium based alloys) in response to the flow of electricity. Theory involving electromigration and electroplasticity is examined and the implications thereof are analyzed. It is shown that, using electrical current, flow stresses are reduced, resulting in a lower specific energy for open-die forging. It is also shown that an applied electrical current increases the forgeability of materials, allowing greater deformation prior to cracking. Moreover, the changes caused by the flow of electricity are significantly greater than those explained by resistive heating. Additionally, elastic recovery is decreased when using electrical flow during deformation. Finally, for most materials, these effects were dependent on strain rate. Overall, this work demonstrates that substantial increases in the forgeability of metals are achieved by deforming the material while applying an electrical current. These improvements exceed those achieved through comparable increases in workpiece temperature and demonstrate that this method provides a viable alternative to warm/hot working.

UR - http://www.scopus.com/inward/record.url?scp=34248327951&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34248327951&partnerID=8YFLogxK

U2 - 10.1115/1.2386164

DO - 10.1115/1.2386164

M3 - Article

VL - 129

SP - 84

EP - 94

JO - Journal of Manufacturing Science and Engineering, Transactions of the ASME

JF - Journal of Manufacturing Science and Engineering, Transactions of the ASME

SN - 1087-1357

IS - 1

ER -