MICROSTRUCTURE AND WEAR PROPERTIES OF LASER CLAD Fe-Cr-Mn-C ALLOYS.

J. Singh, J. Mazumder

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Laser cladding uses a laser beam to melt alloyed powder of different composition placed on top of the substrate as well as a thin layer of the substrate. The objective is to form a thin interfacial layer of an alloy on a given substrate and to provide good surface wear and corrosion properties. The investigation focused on the microstructural changes occurring under different processing conditions. Cr, Mn, and C powders with a ratio of 10:1:1 were used for cladding on AiSi 1016 Steel plate which was used as a substrate material.

Original languageEnglish (US)
Title of host publicationUnknown Host Publication Title
EditorsC. Albright
PublisherIFS (Publ) Ltd
Pages179-185
Number of pages7
ISBN (Print)0948507195
StatePublished - Dec 1 1986

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'MICROSTRUCTURE AND WEAR PROPERTIES OF LASER CLAD Fe-Cr-Mn-C ALLOYS.'. Together they form a unique fingerprint.

  • Cite this

    Singh, J., & Mazumder, J. (1986). MICROSTRUCTURE AND WEAR PROPERTIES OF LASER CLAD Fe-Cr-Mn-C ALLOYS. In C. Albright (Ed.), Unknown Host Publication Title (pp. 179-185). IFS (Publ) Ltd.