@inproceedings{69b1338f19a7471a8ee97a22222b1674,
title = "Modeling and simulating optical MEM switches",
abstract = "This paper presents the modeling and simulation of a 2x2 optical MEM switch using our system-level, mixed-technology CAD tool, Chatoyant. Simulations include operation in both the {"}cross{"} and {"}bar{"} states and the mechanical tolerancing of the system.",
author = "Kurzweg, {T. P.} and Levitan, {S. P.} and Martinez, {J. A.} and Marchand, {P. J.} and Chiarulli, {D. M.}",
note = "Funding Information: also shows intensity distributions as the beam exits the incoming fiber and propagates through free-space. Again, one can see the beam waist spreads as it propagates through the free-space gap. For the perfectly aligned case, the Gaussian beam at the free-space/fiber interface is close to the fiber's ideal mode diameter and is well accepted into the outgoing fiber. However, as the mechanical rotation is applied, the beam enters the tilted fiber, resulting in the beam bouncing back and forth on the core/cladding interface. As seen in the cases with tilts of 2 and 6 degrees, that as the tilts get larger, the beam is not completely captured into the core and some power is lost through the cladding. When the tilt gets above the acceptance angle of the fiber, hardly any of the beam is left to propagate through the fiber. We would like to acknowledge the support of DARPA contract F3602-97-2-0122 and NSF grant ECS-9616879. :1] Bell Labs, http://www.bell-labs.com/news/l999/february/23.h/t1m l. '21 Kurzweg, T.P., et al., Design Automation Conference, June 20-25, 1999, pp.879-884. [3] Levitan, S.P., et al., Applied Optics, Vol. 37, No. 26, September, 1998, pp. 6078-6092. [4] Lin, L.Y., et al., IEEE Phot. Technology Letters, Vol. 10, No.4, April 1998, pp. 525-527. [5] Marxer, C., et al., Journal of Lightwave Technology, Vol. 17, No. 1, January 1999, pp. 2-6. [6] Optical Micro-Machines Inc, http ://www.o{"}inc.com/ [7] RSoft, Inc., http://www.rsoftinc.com/ [8] Wu, M.C., Proceedings ofthe IEEE, Vol. 85, No. 11, November 1997, pp. 1833-1856. Funding Information: We would like to acknowledge the support of DARPA contract F3602-97-2-0122 and NSF grant ECS-9616879. Publisher Copyright: {\textcopyright} 2000 IEEE.; IEEE/LEOS International Conference on Optical MEMS, OPTMEMS 2000 ; Conference date: 21-08-2000 Through 24-08-2000",
year = "2000",
doi = "10.1109/OMEMS.2000.879620",
language = "English (US)",
series = "2000 IEEE/LEOS International Conference on Optical MEMS",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "47--48",
booktitle = "2000 IEEE/LEOS International Conference on Optical MEMS",
address = "United States",
}