Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints

J. A. Bossard, J. A. Smith, D. H. Werner, T. S. Mayer, R. P. Drupp

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Planar metallodielectric photonic crystals (MDPCs) with multiple stop-bands in the far-infrared transmission spectrum have been designed using Frequency Selective Surface (FSS) techniques at the micron-scale. A genetic algorithm (GA) has been used to optimize MDPC designs that exhibit multiple stop-bands with greater than 10dB attenuation. It will be shown that by including design constraints in the GA to account for limitations in the fabrication process, it is still possible to synthesize a subset of MDPC structures that both meet the desired performance criteria and are capable of being accurately fabricated.

Original languageEnglish (US)
Title of host publication2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest
Pages705-708
Number of pages4
DOIs
StatePublished - Dec 1 2005
Event2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting - Washington, DC, United States
Duration: Jul 3 2005Jul 8 2005

Publication series

NameIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Volume1 A
ISSN (Print)1522-3965

Other

Other2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting
CountryUnited States
CityWashington, DC
Period7/3/057/8/05

Fingerprint

Photonic crystals
Genetic algorithms
Infrared radiation
Fabrication
Frequency selective surfaces
Infrared transmission
Crystal structure

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Bossard, J. A., Smith, J. A., Werner, D. H., Mayer, T. S., & Drupp, R. P. (2005). Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints. In 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest (pp. 705-708). [1551419] (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); Vol. 1 A). https://doi.org/10.1109/APS.2005.1551419
Bossard, J. A. ; Smith, J. A. ; Werner, D. H. ; Mayer, T. S. ; Drupp, R. P. / Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints. 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. pp. 705-708 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).
@inproceedings{9c16dc6017004eec9fa3ba07557279b7,
title = "Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints",
abstract = "Planar metallodielectric photonic crystals (MDPCs) with multiple stop-bands in the far-infrared transmission spectrum have been designed using Frequency Selective Surface (FSS) techniques at the micron-scale. A genetic algorithm (GA) has been used to optimize MDPC designs that exhibit multiple stop-bands with greater than 10dB attenuation. It will be shown that by including design constraints in the GA to account for limitations in the fabrication process, it is still possible to synthesize a subset of MDPC structures that both meet the desired performance criteria and are capable of being accurately fabricated.",
author = "Bossard, {J. A.} and Smith, {J. A.} and Werner, {D. H.} and Mayer, {T. S.} and Drupp, {R. P.}",
year = "2005",
month = "12",
day = "1",
doi = "10.1109/APS.2005.1551419",
language = "English (US)",
isbn = "0780388836",
series = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",
pages = "705--708",
booktitle = "2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest",

}

Bossard, JA, Smith, JA, Werner, DH, Mayer, TS & Drupp, RP 2005, Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints. in 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest., 1551419, IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), vol. 1 A, pp. 705-708, 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Washington, DC, United States, 7/3/05. https://doi.org/10.1109/APS.2005.1551419

Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints. / Bossard, J. A.; Smith, J. A.; Werner, D. H.; Mayer, T. S.; Drupp, R. P.

2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. p. 705-708 1551419 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); Vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints

AU - Bossard, J. A.

AU - Smith, J. A.

AU - Werner, D. H.

AU - Mayer, T. S.

AU - Drupp, R. P.

PY - 2005/12/1

Y1 - 2005/12/1

N2 - Planar metallodielectric photonic crystals (MDPCs) with multiple stop-bands in the far-infrared transmission spectrum have been designed using Frequency Selective Surface (FSS) techniques at the micron-scale. A genetic algorithm (GA) has been used to optimize MDPC designs that exhibit multiple stop-bands with greater than 10dB attenuation. It will be shown that by including design constraints in the GA to account for limitations in the fabrication process, it is still possible to synthesize a subset of MDPC structures that both meet the desired performance criteria and are capable of being accurately fabricated.

AB - Planar metallodielectric photonic crystals (MDPCs) with multiple stop-bands in the far-infrared transmission spectrum have been designed using Frequency Selective Surface (FSS) techniques at the micron-scale. A genetic algorithm (GA) has been used to optimize MDPC designs that exhibit multiple stop-bands with greater than 10dB attenuation. It will be shown that by including design constraints in the GA to account for limitations in the fabrication process, it is still possible to synthesize a subset of MDPC structures that both meet the desired performance criteria and are capable of being accurately fabricated.

UR - http://www.scopus.com/inward/record.url?scp=33846892537&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846892537&partnerID=8YFLogxK

U2 - 10.1109/APS.2005.1551419

DO - 10.1109/APS.2005.1551419

M3 - Conference contribution

AN - SCOPUS:33846892537

SN - 0780388836

SN - 9780780388833

T3 - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

SP - 705

EP - 708

BT - 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest

ER -

Bossard JA, Smith JA, Werner DH, Mayer TS, Drupp RP. Multiband planar infrared metallodielectric photonic crystals designed using genetic algorithms with fabrication constraints. In 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. p. 705-708. 1551419. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). https://doi.org/10.1109/APS.2005.1551419