Multiband planar metallodielectric photonic crystals using frequency selective surface techniques

R. P. Drupp, J. A. Bossard, Douglas Henry Werner, T. S. Mayer

Research output: Contribution to journalConference article

5 Citations (Scopus)

Abstract

Two-dimensional single layer metallodielectric photonic crystals (MDPCs) with multiple stopbands in the far-infrared transmission spectrum have been designed and fabricated using frequency selective surface (FSS) techniques at the micron-scale, These surfaces consist of self-similar fractal cross-dipole or fractal square patch metallic elements patterned on thin, flexible dielectric substrates using standard semiconductor microfabrication techniques. Optimization of design parameters, such as element spacing, through the application of a periodic method of moments (PMM) modeling code leads to experimental results with two transmission stopbands, each with greater than 10dB attenuation. These results are in excellent agreement with those predicted by the PMM model. The positions of the bands can be readily controlled by utilizing the modeling data to determine optimum element geometries.

Original languageEnglish (US)
Pages (from-to)1907-1910
Number of pages4
JournalIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Volume2
StatePublished - Sep 29 2004
EventIEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting - Monterey, CA, United States
Duration: Jun 20 2004Jun 25 2004

Fingerprint

Frequency selective surfaces
Method of moments
Photonic crystals
Fractals
Infrared transmission
Microfabrication
Data structures
Semiconductor materials
Geometry
Substrates

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

@article{d28e02ea9a0d497c97c173102e1adb37,
title = "Multiband planar metallodielectric photonic crystals using frequency selective surface techniques",
abstract = "Two-dimensional single layer metallodielectric photonic crystals (MDPCs) with multiple stopbands in the far-infrared transmission spectrum have been designed and fabricated using frequency selective surface (FSS) techniques at the micron-scale, These surfaces consist of self-similar fractal cross-dipole or fractal square patch metallic elements patterned on thin, flexible dielectric substrates using standard semiconductor microfabrication techniques. Optimization of design parameters, such as element spacing, through the application of a periodic method of moments (PMM) modeling code leads to experimental results with two transmission stopbands, each with greater than 10dB attenuation. These results are in excellent agreement with those predicted by the PMM model. The positions of the bands can be readily controlled by utilizing the modeling data to determine optimum element geometries.",
author = "Drupp, {R. P.} and Bossard, {J. A.} and Werner, {Douglas Henry} and Mayer, {T. S.}",
year = "2004",
month = "9",
day = "29",
language = "English (US)",
volume = "2",
pages = "1907--1910",
journal = "AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)",
issn = "0272-4693",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

Multiband planar metallodielectric photonic crystals using frequency selective surface techniques. / Drupp, R. P.; Bossard, J. A.; Werner, Douglas Henry; Mayer, T. S.

In: IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), Vol. 2, 29.09.2004, p. 1907-1910.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Multiband planar metallodielectric photonic crystals using frequency selective surface techniques

AU - Drupp, R. P.

AU - Bossard, J. A.

AU - Werner, Douglas Henry

AU - Mayer, T. S.

PY - 2004/9/29

Y1 - 2004/9/29

N2 - Two-dimensional single layer metallodielectric photonic crystals (MDPCs) with multiple stopbands in the far-infrared transmission spectrum have been designed and fabricated using frequency selective surface (FSS) techniques at the micron-scale, These surfaces consist of self-similar fractal cross-dipole or fractal square patch metallic elements patterned on thin, flexible dielectric substrates using standard semiconductor microfabrication techniques. Optimization of design parameters, such as element spacing, through the application of a periodic method of moments (PMM) modeling code leads to experimental results with two transmission stopbands, each with greater than 10dB attenuation. These results are in excellent agreement with those predicted by the PMM model. The positions of the bands can be readily controlled by utilizing the modeling data to determine optimum element geometries.

AB - Two-dimensional single layer metallodielectric photonic crystals (MDPCs) with multiple stopbands in the far-infrared transmission spectrum have been designed and fabricated using frequency selective surface (FSS) techniques at the micron-scale, These surfaces consist of self-similar fractal cross-dipole or fractal square patch metallic elements patterned on thin, flexible dielectric substrates using standard semiconductor microfabrication techniques. Optimization of design parameters, such as element spacing, through the application of a periodic method of moments (PMM) modeling code leads to experimental results with two transmission stopbands, each with greater than 10dB attenuation. These results are in excellent agreement with those predicted by the PMM model. The positions of the bands can be readily controlled by utilizing the modeling data to determine optimum element geometries.

UR - http://www.scopus.com/inward/record.url?scp=4544261860&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4544261860&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:4544261860

VL - 2

SP - 1907

EP - 1910

JO - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)

JF - AP-S International Symposium (Digest) (IEEE Antennas and Propagation Society)

SN - 0272-4693

ER -