TY - JOUR
T1 - Nanogap near-field thermophotovoltaics
AU - Fiorino, Anthony
AU - Zhu, Linxiao
AU - Thompson, Dakotah
AU - Mittapally, Rohith
AU - Reddy, Pramod
AU - Meyhofer, Edgar
N1 - Funding Information:
P.R. and E.M. acknowledge support from the Army Research Office under awards W911NF-16-1-0195 and W911NF-18-1-0004 (nanopositing and instrumentation), from the Department of Energy-Basic Energy Science under award DE-SC0004871 (scanning probes and experimental design) and the National Science Foundation under award CBET 1509691 (computational modelling). We acknowledge the Lurie Nanofabrication Facility for facilitating the fabrication of devices.
Publisher Copyright:
© 2018, The Author(s).
Copyright:
Copyright 2019 Elsevier B.V., All rights reserved.
PY - 2018/9/1
Y1 - 2018/9/1
N2 - Conversion of heat to electricity via solid-state devices is of great interest and has led to intense research of thermoelectric materials1,2. Alternative approaches for solid-state heat-to-electricity conversion include thermophotovoltaic (TPV) systems where photons from a hot emitter traverse a vacuum gap and are absorbed by a photovoltaic (PV) cell to generate electrical power. In principle, such systems may also achieve higher efficiencies and offer more versatility in use. However, the typical temperature of the hot emitter remains too low (<1,000 K) to achieve a sufficient photon flux to the PV cell, limiting practical applications. Theoretical proposals3–12 suggest that near-field (NF) effects13–18 that arise in nanoscale gaps may be leveraged to increase the photon flux to the PV cell and significantly enhance the power output. Here, we describe functional NFTPV devices consisting of a microfabricated system and a custom-built nanopositioner and demonstrate an ~40-fold enhancement in the power output at nominally 60 nm gaps relative to the far field. We systematically characterize this enhancement over a range of gap sizes and emitter temperatures, and for PV cells with two different bandgap energies. We anticipate that this technology, once optimized, will be viable for waste heat recovery applications.
AB - Conversion of heat to electricity via solid-state devices is of great interest and has led to intense research of thermoelectric materials1,2. Alternative approaches for solid-state heat-to-electricity conversion include thermophotovoltaic (TPV) systems where photons from a hot emitter traverse a vacuum gap and are absorbed by a photovoltaic (PV) cell to generate electrical power. In principle, such systems may also achieve higher efficiencies and offer more versatility in use. However, the typical temperature of the hot emitter remains too low (<1,000 K) to achieve a sufficient photon flux to the PV cell, limiting practical applications. Theoretical proposals3–12 suggest that near-field (NF) effects13–18 that arise in nanoscale gaps may be leveraged to increase the photon flux to the PV cell and significantly enhance the power output. Here, we describe functional NFTPV devices consisting of a microfabricated system and a custom-built nanopositioner and demonstrate an ~40-fold enhancement in the power output at nominally 60 nm gaps relative to the far field. We systematically characterize this enhancement over a range of gap sizes and emitter temperatures, and for PV cells with two different bandgap energies. We anticipate that this technology, once optimized, will be viable for waste heat recovery applications.
UR - http://www.scopus.com/inward/record.url?scp=85048698159&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85048698159&partnerID=8YFLogxK
U2 - 10.1038/s41565-018-0172-5
DO - 10.1038/s41565-018-0172-5
M3 - Letter
C2 - 29915273
AN - SCOPUS:85048698159
VL - 13
SP - 806
EP - 811
JO - Nature Nanotechnology
JF - Nature Nanotechnology
SN - 1748-3387
IS - 9
ER -