On Sintering of Ceramics Cylinder for High Rigid Bearings of High Precision Gear Rolling Tester

Iwao Hayashi, Teru Hayashi, Katsuya Kashiwagi, Shoichiro Nomura, Kenji Uchino

Research output: Contribution to journalArticle

Abstract

The pressure for molding and its influence on the electrostrictive characteristics of PMN ceramics, and the sintering deformation of the cylinder made from the ceramics are studied. The ceramics cylinders will be used as raw materials of the active high rigid bearings of the gear rolling tester which authors intend to construct. The followings are obtained: (1) The good density and the good electrostrictive characteristics are obtained under the pressure lower than 45% of the limit pressure at which some cracks appear in the ceramics cylinder pushed out of a mold. (2) The formulae which can describe the shrinking deformation of ceramics cylinder are obtained under the assumption of the elastic deformation of ceramics cylinder. (3) The shrinking deformation is controlled by using the cylinder base of the same material as expected from the studies with the formulae.

Original languageEnglish (US)
Pages (from-to)826-831
Number of pages6
JournalJournal of the Japan Society for Precision Engineering
Volume52
Issue number5
DOIs
StatePublished - 1986

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'On Sintering of Ceramics Cylinder for High Rigid Bearings of High Precision Gear Rolling Tester'. Together they form a unique fingerprint.

  • Cite this