On the continuum approximation of the on-and-off signal control on dynamic traffic networks

Ke Han, Vikash V. Gayah, Benedetto Piccoli, Terry L. Friesz, Tao Yao

Research output: Contribution to journalArticle

30 Citations (Scopus)

Abstract

In the modeling of traffic networks, a signalized junction is typically treated using a binary variable to model the on-and-off nature of signal operation. While accurate, the use of binary variables can cause problems when studying large networks with many intersections. Instead, the signal control can be approximated through a continuum approach where the on-and-off control variable is replaced by a continuous priority parameter. Advantages of such approximation include elimination of the need for binary variables, lower time resolution requirements, and more flexibility and robustness in a decision environment. It also resolves the issue of discontinuous travel time functions arising from the context of dynamic traffic assignment.Despite these advantages in application, it is not clear from a theoretical point of view how accurate is such continuum approach; i.e., to what extent is this a valid approximation for the on-and-off case. The goal of this paper is to answer these basic research questions and provide further guidance for the application of such continuum signal model. In particular, by employing the Lighthill-Whitham-Richards model (Lighthill and Whitham, 1955; Richards, 1956) on a traffic network, we investigate the convergence of the on-and-off signal model to the continuum model in regimes of diminishing signal cycles. We also provide numerical analyses on the continuum approximation error when the signal cycles are not infinitesimal. As we explain, such convergence results and error estimates depend on the type of fundamental diagram assumed and whether or not vehicle spillback occurs to the signalized intersection in question. Finally, a traffic signal optimization problem is presented and solved which illustrates the unique advantages of applying the continuum signal model instead of the on-and-off model.

Original languageEnglish (US)
Pages (from-to)73-97
Number of pages25
JournalTransportation Research Part B: Methodological
Volume61
DOIs
StatePublished - Mar 2014

Fingerprint

traffic
Traffic signals
basic research
Travel time
flexibility
travel
regime
cause
time

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Transportation

Cite this

@article{78afe8fe31a146b98dd62a467f335a83,
title = "On the continuum approximation of the on-and-off signal control on dynamic traffic networks",
abstract = "In the modeling of traffic networks, a signalized junction is typically treated using a binary variable to model the on-and-off nature of signal operation. While accurate, the use of binary variables can cause problems when studying large networks with many intersections. Instead, the signal control can be approximated through a continuum approach where the on-and-off control variable is replaced by a continuous priority parameter. Advantages of such approximation include elimination of the need for binary variables, lower time resolution requirements, and more flexibility and robustness in a decision environment. It also resolves the issue of discontinuous travel time functions arising from the context of dynamic traffic assignment.Despite these advantages in application, it is not clear from a theoretical point of view how accurate is such continuum approach; i.e., to what extent is this a valid approximation for the on-and-off case. The goal of this paper is to answer these basic research questions and provide further guidance for the application of such continuum signal model. In particular, by employing the Lighthill-Whitham-Richards model (Lighthill and Whitham, 1955; Richards, 1956) on a traffic network, we investigate the convergence of the on-and-off signal model to the continuum model in regimes of diminishing signal cycles. We also provide numerical analyses on the continuum approximation error when the signal cycles are not infinitesimal. As we explain, such convergence results and error estimates depend on the type of fundamental diagram assumed and whether or not vehicle spillback occurs to the signalized intersection in question. Finally, a traffic signal optimization problem is presented and solved which illustrates the unique advantages of applying the continuum signal model instead of the on-and-off model.",
author = "Ke Han and Gayah, {Vikash V.} and Benedetto Piccoli and Friesz, {Terry L.} and Tao Yao",
year = "2014",
month = "3",
doi = "10.1016/j.trb.2014.01.001",
language = "English (US)",
volume = "61",
pages = "73--97",
journal = "Transportation Research, Series B: Methodological",
issn = "0191-2615",
publisher = "Elsevier Limited",

}

On the continuum approximation of the on-and-off signal control on dynamic traffic networks. / Han, Ke; Gayah, Vikash V.; Piccoli, Benedetto; Friesz, Terry L.; Yao, Tao.

In: Transportation Research Part B: Methodological, Vol. 61, 03.2014, p. 73-97.

Research output: Contribution to journalArticle

TY - JOUR

T1 - On the continuum approximation of the on-and-off signal control on dynamic traffic networks

AU - Han, Ke

AU - Gayah, Vikash V.

AU - Piccoli, Benedetto

AU - Friesz, Terry L.

AU - Yao, Tao

PY - 2014/3

Y1 - 2014/3

N2 - In the modeling of traffic networks, a signalized junction is typically treated using a binary variable to model the on-and-off nature of signal operation. While accurate, the use of binary variables can cause problems when studying large networks with many intersections. Instead, the signal control can be approximated through a continuum approach where the on-and-off control variable is replaced by a continuous priority parameter. Advantages of such approximation include elimination of the need for binary variables, lower time resolution requirements, and more flexibility and robustness in a decision environment. It also resolves the issue of discontinuous travel time functions arising from the context of dynamic traffic assignment.Despite these advantages in application, it is not clear from a theoretical point of view how accurate is such continuum approach; i.e., to what extent is this a valid approximation for the on-and-off case. The goal of this paper is to answer these basic research questions and provide further guidance for the application of such continuum signal model. In particular, by employing the Lighthill-Whitham-Richards model (Lighthill and Whitham, 1955; Richards, 1956) on a traffic network, we investigate the convergence of the on-and-off signal model to the continuum model in regimes of diminishing signal cycles. We also provide numerical analyses on the continuum approximation error when the signal cycles are not infinitesimal. As we explain, such convergence results and error estimates depend on the type of fundamental diagram assumed and whether or not vehicle spillback occurs to the signalized intersection in question. Finally, a traffic signal optimization problem is presented and solved which illustrates the unique advantages of applying the continuum signal model instead of the on-and-off model.

AB - In the modeling of traffic networks, a signalized junction is typically treated using a binary variable to model the on-and-off nature of signal operation. While accurate, the use of binary variables can cause problems when studying large networks with many intersections. Instead, the signal control can be approximated through a continuum approach where the on-and-off control variable is replaced by a continuous priority parameter. Advantages of such approximation include elimination of the need for binary variables, lower time resolution requirements, and more flexibility and robustness in a decision environment. It also resolves the issue of discontinuous travel time functions arising from the context of dynamic traffic assignment.Despite these advantages in application, it is not clear from a theoretical point of view how accurate is such continuum approach; i.e., to what extent is this a valid approximation for the on-and-off case. The goal of this paper is to answer these basic research questions and provide further guidance for the application of such continuum signal model. In particular, by employing the Lighthill-Whitham-Richards model (Lighthill and Whitham, 1955; Richards, 1956) on a traffic network, we investigate the convergence of the on-and-off signal model to the continuum model in regimes of diminishing signal cycles. We also provide numerical analyses on the continuum approximation error when the signal cycles are not infinitesimal. As we explain, such convergence results and error estimates depend on the type of fundamental diagram assumed and whether or not vehicle spillback occurs to the signalized intersection in question. Finally, a traffic signal optimization problem is presented and solved which illustrates the unique advantages of applying the continuum signal model instead of the on-and-off model.

UR - http://www.scopus.com/inward/record.url?scp=84896339401&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84896339401&partnerID=8YFLogxK

U2 - 10.1016/j.trb.2014.01.001

DO - 10.1016/j.trb.2014.01.001

M3 - Article

AN - SCOPUS:84896339401

VL - 61

SP - 73

EP - 97

JO - Transportation Research, Series B: Methodological

JF - Transportation Research, Series B: Methodological

SN - 0191-2615

ER -