On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces

Liming Chang, M. N. Webster, A. Jackson

Research output: Contribution to journalConference article

Abstract

The objective of this paper is to conduct a qualitative analysis on the effects of lubricant shear thinning, lubricant shear heating and the roughness-induced transients on the pressure rippling and roughness deformation that occurs under elastohydrodynamic lubrication (EHL) conditions. To facilitate the analysis, the numerical solutions to an example problem of EHL line contact between a perfectly smooth surface and a sinusoidal rough surface are presented. This micro-EHL problem is first solved using the conventional model of a Newtonian lubricant and a stationary rough surface under isothermal conditions. It is then solved by including the non-Newtonian effects, the roughness-induced transients and the thermal effects in sequence, so that the changes in the results brought about by each of these elements can be clearly observed and then analyzed. The analysis, which is not limited to the model problem solved in this paper, suggests that misleading results of large pressure rippling and flattened surface roughness are obtained using the Newtonian lubricant models under steady-state, isothermal conditions. Much less micro-deformation of the surface roughness is actually produced because the magnitude of the pressure ripples is greatly limited by either the lubricant non-Newtonian shear thinning and shear heating or the roughness-induced transients.

Original languageEnglish (US)
Pages (from-to)1-6
Number of pages6
JournalAmerican Society of Mechanical Engineers (Paper)
StatePublished - Dec 1 1992
EventASME/STLE Tribology Conference - San Diego, CA, USA
Duration: Oct 18 1992Oct 21 1992

Fingerprint

Elastohydrodynamic lubrication
Surface roughness
Lubricants
Shear thinning
Heating
Thermal effects

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

Cite this

@article{af6b3b70c2d34f909da5d2299c0f65f6,
title = "On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces",
abstract = "The objective of this paper is to conduct a qualitative analysis on the effects of lubricant shear thinning, lubricant shear heating and the roughness-induced transients on the pressure rippling and roughness deformation that occurs under elastohydrodynamic lubrication (EHL) conditions. To facilitate the analysis, the numerical solutions to an example problem of EHL line contact between a perfectly smooth surface and a sinusoidal rough surface are presented. This micro-EHL problem is first solved using the conventional model of a Newtonian lubricant and a stationary rough surface under isothermal conditions. It is then solved by including the non-Newtonian effects, the roughness-induced transients and the thermal effects in sequence, so that the changes in the results brought about by each of these elements can be clearly observed and then analyzed. The analysis, which is not limited to the model problem solved in this paper, suggests that misleading results of large pressure rippling and flattened surface roughness are obtained using the Newtonian lubricant models under steady-state, isothermal conditions. Much less micro-deformation of the surface roughness is actually produced because the magnitude of the pressure ripples is greatly limited by either the lubricant non-Newtonian shear thinning and shear heating or the roughness-induced transients.",
author = "Liming Chang and Webster, {M. N.} and A. Jackson",
year = "1992",
month = "12",
day = "1",
language = "English (US)",
pages = "1--6",
journal = "[No source information available]",
issn = "0402-1215",

}

On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces. / Chang, Liming; Webster, M. N.; Jackson, A.

In: American Society of Mechanical Engineers (Paper), 01.12.1992, p. 1-6.

Research output: Contribution to journalConference article

TY - JOUR

T1 - On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces

AU - Chang, Liming

AU - Webster, M. N.

AU - Jackson, A.

PY - 1992/12/1

Y1 - 1992/12/1

N2 - The objective of this paper is to conduct a qualitative analysis on the effects of lubricant shear thinning, lubricant shear heating and the roughness-induced transients on the pressure rippling and roughness deformation that occurs under elastohydrodynamic lubrication (EHL) conditions. To facilitate the analysis, the numerical solutions to an example problem of EHL line contact between a perfectly smooth surface and a sinusoidal rough surface are presented. This micro-EHL problem is first solved using the conventional model of a Newtonian lubricant and a stationary rough surface under isothermal conditions. It is then solved by including the non-Newtonian effects, the roughness-induced transients and the thermal effects in sequence, so that the changes in the results brought about by each of these elements can be clearly observed and then analyzed. The analysis, which is not limited to the model problem solved in this paper, suggests that misleading results of large pressure rippling and flattened surface roughness are obtained using the Newtonian lubricant models under steady-state, isothermal conditions. Much less micro-deformation of the surface roughness is actually produced because the magnitude of the pressure ripples is greatly limited by either the lubricant non-Newtonian shear thinning and shear heating or the roughness-induced transients.

AB - The objective of this paper is to conduct a qualitative analysis on the effects of lubricant shear thinning, lubricant shear heating and the roughness-induced transients on the pressure rippling and roughness deformation that occurs under elastohydrodynamic lubrication (EHL) conditions. To facilitate the analysis, the numerical solutions to an example problem of EHL line contact between a perfectly smooth surface and a sinusoidal rough surface are presented. This micro-EHL problem is first solved using the conventional model of a Newtonian lubricant and a stationary rough surface under isothermal conditions. It is then solved by including the non-Newtonian effects, the roughness-induced transients and the thermal effects in sequence, so that the changes in the results brought about by each of these elements can be clearly observed and then analyzed. The analysis, which is not limited to the model problem solved in this paper, suggests that misleading results of large pressure rippling and flattened surface roughness are obtained using the Newtonian lubricant models under steady-state, isothermal conditions. Much less micro-deformation of the surface roughness is actually produced because the magnitude of the pressure ripples is greatly limited by either the lubricant non-Newtonian shear thinning and shear heating or the roughness-induced transients.

UR - http://www.scopus.com/inward/record.url?scp=0027090851&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027090851&partnerID=8YFLogxK

M3 - Conference article

SP - 1

EP - 6

JO - [No source information available]

JF - [No source information available]

SN - 0402-1215

ER -