The dynamic acousto-elasticity (DAE) technique uniquely provides the elastic (speed of sound and attenuation) behavior over a dynamic strain cycle. This technique has been applied successfully to highly nonlinear materials such as rock samples, where nonlinear elastic sources are present throughout the material. DAE has shown different nonlinear elastic behavior in tension and compression as well as early-time memory effects (i.e. fast and slow dynamics) that cannot be observed with conventional dynamic techniques (e.g. resonance or wave mixing measurements). The main objective of the present study is to evaluate if the DAE technique is also sensitive to (1) fatigue damage and (2) a localized stress corrosion crack. A secondary objective is to adapt the DAE experimental setup to perform measurements in smaller specimens (thickness of few cm). Several samples (intact aluminium, fatigued aluminium and steel with a stress corrosion crack) were investigated. Using signal processing not normally applied to DAE, we are able to measure the nonlinear elastic response of intact aluminium, distinguish the intact from the fatigued aluminium sample and localize different nonlinear features in the stress corrosion cracked steel sample.
All Science Journal Classification (ASJC) codes
- Mechanics of Materials
- Mechanical Engineering