Prediction of electrical behavior in deteriorating induction motors

Frederick C. Trutt, Carlos Santa Cruz, Jeffery L. Kohler, Joseph Sottile

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

Methods for the prediction of electrical behavior in deteriorating induction machines are surveyed. Generally, these procedures require the assumption of a specific motor speed. The electrical operating parameters are then calculated using a model developed for this purpose. These models normally allow an arbitrary number of winding deterioration processes to be simulated on the stator and/or rotor. Forms of deterioration might include high- or low-impedance leakage between phases, between coils in a single phase, or between a phase and ground. In this paper, experimental data for a three-phase, wound rotor induction motor with stator deterioration is compared with the predictions of a specific model of that motor. Procedures are then developed for the prediction of deterioration trends in classes of motors. One application of such an analysis would be in the generation of data bases required to design and develop performance monitoring, deterioration detection, or deterioration classification systems for critical motor installations without the need to develop a predictive model for each motor type.

Original languageEnglish (US)
Pages (from-to)1239-1243
Number of pages5
JournalIEEE Transactions on Industry Applications
Volume29
Issue number6
DOIs
StatePublished - Jan 1 1993

Fingerprint

Induction motors
Deterioration
Stators
Rotors (windings)
Rotors
Monitoring

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Trutt, Frederick C. ; Cruz, Carlos Santa ; Kohler, Jeffery L. ; Sottile, Joseph. / Prediction of electrical behavior in deteriorating induction motors. In: IEEE Transactions on Industry Applications. 1993 ; Vol. 29, No. 6. pp. 1239-1243.
@article{12fcdd291aea4a9ebe82e44f3d5af071,
title = "Prediction of electrical behavior in deteriorating induction motors",
abstract = "Methods for the prediction of electrical behavior in deteriorating induction machines are surveyed. Generally, these procedures require the assumption of a specific motor speed. The electrical operating parameters are then calculated using a model developed for this purpose. These models normally allow an arbitrary number of winding deterioration processes to be simulated on the stator and/or rotor. Forms of deterioration might include high- or low-impedance leakage between phases, between coils in a single phase, or between a phase and ground. In this paper, experimental data for a three-phase, wound rotor induction motor with stator deterioration is compared with the predictions of a specific model of that motor. Procedures are then developed for the prediction of deterioration trends in classes of motors. One application of such an analysis would be in the generation of data bases required to design and develop performance monitoring, deterioration detection, or deterioration classification systems for critical motor installations without the need to develop a predictive model for each motor type.",
author = "Trutt, {Frederick C.} and Cruz, {Carlos Santa} and Kohler, {Jeffery L.} and Joseph Sottile",
year = "1993",
month = "1",
day = "1",
doi = "10.1109/28.259738",
language = "English (US)",
volume = "29",
pages = "1239--1243",
journal = "IEEE Transactions on Industry Applications",
issn = "0093-9994",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "6",

}

Prediction of electrical behavior in deteriorating induction motors. / Trutt, Frederick C.; Cruz, Carlos Santa; Kohler, Jeffery L.; Sottile, Joseph.

In: IEEE Transactions on Industry Applications, Vol. 29, No. 6, 01.01.1993, p. 1239-1243.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Prediction of electrical behavior in deteriorating induction motors

AU - Trutt, Frederick C.

AU - Cruz, Carlos Santa

AU - Kohler, Jeffery L.

AU - Sottile, Joseph

PY - 1993/1/1

Y1 - 1993/1/1

N2 - Methods for the prediction of electrical behavior in deteriorating induction machines are surveyed. Generally, these procedures require the assumption of a specific motor speed. The electrical operating parameters are then calculated using a model developed for this purpose. These models normally allow an arbitrary number of winding deterioration processes to be simulated on the stator and/or rotor. Forms of deterioration might include high- or low-impedance leakage between phases, between coils in a single phase, or between a phase and ground. In this paper, experimental data for a three-phase, wound rotor induction motor with stator deterioration is compared with the predictions of a specific model of that motor. Procedures are then developed for the prediction of deterioration trends in classes of motors. One application of such an analysis would be in the generation of data bases required to design and develop performance monitoring, deterioration detection, or deterioration classification systems for critical motor installations without the need to develop a predictive model for each motor type.

AB - Methods for the prediction of electrical behavior in deteriorating induction machines are surveyed. Generally, these procedures require the assumption of a specific motor speed. The electrical operating parameters are then calculated using a model developed for this purpose. These models normally allow an arbitrary number of winding deterioration processes to be simulated on the stator and/or rotor. Forms of deterioration might include high- or low-impedance leakage between phases, between coils in a single phase, or between a phase and ground. In this paper, experimental data for a three-phase, wound rotor induction motor with stator deterioration is compared with the predictions of a specific model of that motor. Procedures are then developed for the prediction of deterioration trends in classes of motors. One application of such an analysis would be in the generation of data bases required to design and develop performance monitoring, deterioration detection, or deterioration classification systems for critical motor installations without the need to develop a predictive model for each motor type.

UR - http://www.scopus.com/inward/record.url?scp=0027694998&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027694998&partnerID=8YFLogxK

U2 - 10.1109/28.259738

DO - 10.1109/28.259738

M3 - Article

AN - SCOPUS:0027694998

VL - 29

SP - 1239

EP - 1243

JO - IEEE Transactions on Industry Applications

JF - IEEE Transactions on Industry Applications

SN - 0093-9994

IS - 6

ER -