Preparation of chemically etched piezoelectric resonators for density meters and viscometers

Susan Trolier, Q. C. Xu, R. E. Newnham

Research output: Contribution to journalArticle

4 Scopus citations

Abstract

Photolithography and chemical etching were investigated as a potential means of fabricating miniature piezoelectric devices. Among the acids studied, concentrated HCl demonstrated the fastest etching of PZT disks over a wide temperature range. HCl also proved to be compatible with some commercially available photoresists and so could be incorporated into a simple processing procedure for delineating and etching patterns in the ceramic. Using this technique, flexural mode resonators similar to tuning forks were generated with fundamental resonances between 10 and 115 kHz. These devices were then used to provide simultaneous measurements of the density and viscosity of liquids by monitoring the position of the resonance frequency and the width of the resonant peak, respectively.

Original languageEnglish (US)
Pages (from-to)1267-1274
Number of pages8
JournalMaterials Research Bulletin
Volume22
Issue number9
DOIs
StatePublished - Sep 1987

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this