Pressure sensitive nonassociative plasticity model for DRA composites

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

Discontinuously reinforced aluminum (DRA) is currently used where design considerations include specific stiffness, tailorable coefficient of thermal expansion, or wear resistance. Plastic deformation plays a role in failures due to low cycle fatigue or simple ductile overload. DRA is known to exhibit pressure dependent yielding. Plastic deformation in metals is widely regarded to be incompressible, or very nearly so. A continuum plasticity model is developed that includes a Drucker-Prager pressure dependent yield function, plastic incompressibility via a nonassociative Prandtl-Reuss flow rule, and a generalized Armstrong-Frederick kinematic hardening law. The model is implemented using a return mapping algorithm with backward Euler integration for stability and the Newton method to determine the plastic multiplier. Material parameters are characterized from uniaxial tension and uniaxial compression experimental results. Model predictions are compared to experimental results for a nonproportional compression-shear load path. The tangent stiffness tensor is nonsymmetric because the flow rule is not associated with the yield function, which means that the commonly used algorithms that require symmetric matrices cannot be used with this material model. Model correlations with tension and compression loadings are excellent. Model predictions of shear and nonproportional compression-shear loadings are reasonably good. The nonassociative flow rule could not be validated by comparison of the plastic strain rate direction with the yield function and the flow potential due to scatter in the experimental results. The model is capable of predicting the material response obtained in the experiments, but additional validation is necessary for the condition of high hydrostatic pressure.

Original languageEnglish (US)
Pages (from-to)255-264
Number of pages10
JournalJournal of Engineering Materials and Technology, Transactions of the ASME
Volume129
Issue number2
DOIs
StatePublished - Apr 1 2007

Fingerprint

Aluminum
plastic properties
Plasticity
aluminum
composite materials
Composite materials
Plastic deformation
plastics
shear
plastic deformation
stiffness
Stiffness
Plastics
incompressibility
Newton methods
potential flow
Potential flow
multipliers
Hydrostatic pressure
Newton-Raphson method

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

@article{e7b379a3f37648e49216da40b2798149,
title = "Pressure sensitive nonassociative plasticity model for DRA composites",
abstract = "Discontinuously reinforced aluminum (DRA) is currently used where design considerations include specific stiffness, tailorable coefficient of thermal expansion, or wear resistance. Plastic deformation plays a role in failures due to low cycle fatigue or simple ductile overload. DRA is known to exhibit pressure dependent yielding. Plastic deformation in metals is widely regarded to be incompressible, or very nearly so. A continuum plasticity model is developed that includes a Drucker-Prager pressure dependent yield function, plastic incompressibility via a nonassociative Prandtl-Reuss flow rule, and a generalized Armstrong-Frederick kinematic hardening law. The model is implemented using a return mapping algorithm with backward Euler integration for stability and the Newton method to determine the plastic multiplier. Material parameters are characterized from uniaxial tension and uniaxial compression experimental results. Model predictions are compared to experimental results for a nonproportional compression-shear load path. The tangent stiffness tensor is nonsymmetric because the flow rule is not associated with the yield function, which means that the commonly used algorithms that require symmetric matrices cannot be used with this material model. Model correlations with tension and compression loadings are excellent. Model predictions of shear and nonproportional compression-shear loadings are reasonably good. The nonassociative flow rule could not be validated by comparison of the plastic strain rate direction with the yield function and the flow potential due to scatter in the experimental results. The model is capable of predicting the material response obtained in the experiments, but additional validation is necessary for the condition of high hydrostatic pressure.",
author = "Xin Lei and {Lissenden, III}, {Clifford Jesse}",
year = "2007",
month = "4",
day = "1",
doi = "10.1115/1.2400273",
language = "English (US)",
volume = "129",
pages = "255--264",
journal = "Journal of Engineering Materials and Technology, Transactions of the ASME",
issn = "0094-4289",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "2",

}

TY - JOUR

T1 - Pressure sensitive nonassociative plasticity model for DRA composites

AU - Lei, Xin

AU - Lissenden, III, Clifford Jesse

PY - 2007/4/1

Y1 - 2007/4/1

N2 - Discontinuously reinforced aluminum (DRA) is currently used where design considerations include specific stiffness, tailorable coefficient of thermal expansion, or wear resistance. Plastic deformation plays a role in failures due to low cycle fatigue or simple ductile overload. DRA is known to exhibit pressure dependent yielding. Plastic deformation in metals is widely regarded to be incompressible, or very nearly so. A continuum plasticity model is developed that includes a Drucker-Prager pressure dependent yield function, plastic incompressibility via a nonassociative Prandtl-Reuss flow rule, and a generalized Armstrong-Frederick kinematic hardening law. The model is implemented using a return mapping algorithm with backward Euler integration for stability and the Newton method to determine the plastic multiplier. Material parameters are characterized from uniaxial tension and uniaxial compression experimental results. Model predictions are compared to experimental results for a nonproportional compression-shear load path. The tangent stiffness tensor is nonsymmetric because the flow rule is not associated with the yield function, which means that the commonly used algorithms that require symmetric matrices cannot be used with this material model. Model correlations with tension and compression loadings are excellent. Model predictions of shear and nonproportional compression-shear loadings are reasonably good. The nonassociative flow rule could not be validated by comparison of the plastic strain rate direction with the yield function and the flow potential due to scatter in the experimental results. The model is capable of predicting the material response obtained in the experiments, but additional validation is necessary for the condition of high hydrostatic pressure.

AB - Discontinuously reinforced aluminum (DRA) is currently used where design considerations include specific stiffness, tailorable coefficient of thermal expansion, or wear resistance. Plastic deformation plays a role in failures due to low cycle fatigue or simple ductile overload. DRA is known to exhibit pressure dependent yielding. Plastic deformation in metals is widely regarded to be incompressible, or very nearly so. A continuum plasticity model is developed that includes a Drucker-Prager pressure dependent yield function, plastic incompressibility via a nonassociative Prandtl-Reuss flow rule, and a generalized Armstrong-Frederick kinematic hardening law. The model is implemented using a return mapping algorithm with backward Euler integration for stability and the Newton method to determine the plastic multiplier. Material parameters are characterized from uniaxial tension and uniaxial compression experimental results. Model predictions are compared to experimental results for a nonproportional compression-shear load path. The tangent stiffness tensor is nonsymmetric because the flow rule is not associated with the yield function, which means that the commonly used algorithms that require symmetric matrices cannot be used with this material model. Model correlations with tension and compression loadings are excellent. Model predictions of shear and nonproportional compression-shear loadings are reasonably good. The nonassociative flow rule could not be validated by comparison of the plastic strain rate direction with the yield function and the flow potential due to scatter in the experimental results. The model is capable of predicting the material response obtained in the experiments, but additional validation is necessary for the condition of high hydrostatic pressure.

UR - http://www.scopus.com/inward/record.url?scp=34249883986&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34249883986&partnerID=8YFLogxK

U2 - 10.1115/1.2400273

DO - 10.1115/1.2400273

M3 - Article

AN - SCOPUS:34249883986

VL - 129

SP - 255

EP - 264

JO - Journal of Engineering Materials and Technology, Transactions of the ASME

JF - Journal of Engineering Materials and Technology, Transactions of the ASME

SN - 0094-4289

IS - 2

ER -