RBHT steam cooling and droplet injection pre-test analysis using COBRA-TF

C. Frepoli, A. J. Ireland, L. E. Hochreiter, Fan-bill B. Cheung

    Research output: Contribution to journalConference article

    2 Scopus citations

    Abstract

    The droplet injection experiments to be performed in a 7×7 rod bundle heat transfer test facility are being simulated using an advanced thermal hydraulics computer code called COBRA-TF, A current version of the code, which provides a three-dimensional, two-fluid, three-field representation of the two-phase flow, is modified to facilitate the simulation of the droplet field produced by the injection system in the test facility. The liquid phase is split into a continuous liquid field and droplet field where a separate momentum and mass equation is solved for each field, with the effects of spacer grids being properly accounted for. Pre-test analyses using the modified COBRA-TF code have been conducted for different injection conditions. Results indicate that there are specific ranges of conditions that can be simulated within the facility constraints to provide for validation of the dispersed flow film boiling models. The numerical results also show important effects of the spacer grids on the local heat transfer in the dispersed flow film boiling regime.

    Original languageEnglish (US)
    Pages (from-to)265-271
    Number of pages7
    JournalAmerican Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
    Volume369
    Issue number2
    StatePublished - Dec 1 2001
    Event2001 ASME International Mechanical Engineering Congress and Exposition - New York, NY, United States
    Duration: Nov 11 2001Nov 16 2001

    All Science Journal Classification (ASJC) codes

    • Mechanical Engineering
    • Fluid Flow and Transfer Processes

    Fingerprint Dive into the research topics of 'RBHT steam cooling and droplet injection pre-test analysis using COBRA-TF'. Together they form a unique fingerprint.

  • Cite this