React-wind-sinter processing of high superconductor fraction Bi 2Sr2CaCu2Ox/AgMg round wire

X. T. Liu, T. M. Shen, U. P. Trociewitz, J. Schwartz

Research output: Contribution to journalArticlepeer-review

20 Scopus citations

Abstract

Bi2Sr2CaCu2Ox (Bi2212) conductor technology has advanced significantly but the development of magnets is still hampered by difficulties associated with the partial-melt process (for wind&react magnets) and strain limitations (for react& wind magnets). To avoid these problems, the React-Wind-Sinter (RWS) approach has been proposed. Here we report on experiments that investigate three split processes that are based on the conventional partial-melt process within the RWS concept. The partial-melt process was interrupted at T1, T1 -10°C and Ts •After cooling to room temperature, the conductor is bent to a series of diameters (40 mm-100 mm), replicating magnet construction. The heat treatment process is then resumed on the bent samples from the split point and the heat treatment completed. The critical current is measured at 4.2 K in self-field using the four-probe method and the microstructure and phase composition of the Bi2212/AgMg wire are examined with scanning electron microscopy. For the split processes, the critical current after full heat treatment is as high as those from conventionally processed short samples, and in at least one case it is increased by 40% relative to conventional processing. These results show that a split process is a promising approach to improved Bi2212 conductors and magnets, and more broadly shows that conventional Bi2212 partial-melt processing is far from optimized.

Original languageEnglish (US)
Article number4515879
Pages (from-to)1179-1183
Number of pages5
JournalIEEE Transactions on Applied Superconductivity
Volume18
Issue number2
DOIs
StatePublished - Jun 2008

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'React-wind-sinter processing of high superconductor fraction Bi <sub>2</sub>Sr<sub>2</sub>CaCu<sub>2</sub>O<sub>x</sub>/AgMg round wire'. Together they form a unique fingerprint.

Cite this