Redistribution of fields inside a single mode cavity during H-field heating of ferrites

D. C. Dube, R. Peelamedu, Dinesh Kumar Agrawal, R. Roy

Research output: Contribution to conferencePaperpeer-review

Abstract

The location of two H max regions along the side walls of the TE 103 single mode cavity has made convenient to measure and study changes in magnetic field rather that electric field during a field heating experiment. A probe consisting of a small loop antenna (dia. ∼ 4 mm) at one end of a 50 ohm copper cable, nearly half a meter long was designed to profile magnetic fields inside the cavity. The other end of the cable was connected to a Schottky barrier diode (BAT-46) which was fed into a current meter. This measured current is proportional to magnetic field and very well indicate the distribution of fields inside the cavity. Experiments were conducted by placing the loop close to the Fe 3O 4 sample and away from the sample during H-field heating. In this talk, theory, probe design, measurement details, the variation in probe current with time will be elaborately discussed. In addition to the above, application of this technique to other ferrite materials will also be discussed.

Original languageEnglish (US)
Number of pages1
StatePublished - Dec 1 2004
Event2004 AIChE Annual Meeting - Austin, TX, United States
Duration: Nov 7 2004Nov 12 2004

Other

Other2004 AIChE Annual Meeting
CountryUnited States
CityAustin, TX
Period11/7/0411/12/04

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Redistribution of fields inside a single mode cavity during H-field heating of ferrites'. Together they form a unique fingerprint.

Cite this