Resurrecting the electrolytic plotting tank

Robert Edwards, Tim Demetrio, David H. Johnson

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Before the advent of CFD software, electrolytic plotting tanks were used extensively to plot three-dimensional heat transfer and fluid flow fields. The theory behind these tanks is the well know electrical analogy between electrical fields and temperature or flow fields based on the Laplace equation. These tanks have been essentially replaced with modern computational methods. As part of a student project, a set of small plotting tanks were designed and built to use as a heat transfer lab on two-dimensional conduction. These particular tanks have been designed to simulate a variety of boundary conditions. Readily available saline solution is used as the electrolyte. In order to simplify the plotting, and to reduce the over cost a modified common pencil is used as the probe, and the plot is made directly on a sheet of paper at the bottom of the container. Boundary conditions are simulated using up to 5 volts DC. This paper describes the development of these devices and the test results. Results have been compared to finite difference plots and to ANSYS plots to verify that the tanks are working as intended, and these results are included in the paper. The simple tanks yield results very close to the analytical methods. Also included in the paper is a brief history of electrolytic plotting tanks, the relevant theory and a description of a potential lab exercise using these tanks.

Original languageEnglish (US)
Title of host publication118th ASEE Annual Conference and Exposition
StatePublished - 2011
Event118th ASEE Annual Conference and Exposition - Vancouver, BC, Canada
Duration: Jun 26 2011Jun 29 2011

Other

Other118th ASEE Annual Conference and Exposition
CountryCanada
CityVancouver, BC
Period6/26/116/29/11

Fingerprint

Flow fields
Boundary conditions
Heat transfer
Laplace equation
Computational methods
Containers
Flow of fluids
Computational fluid dynamics
Temperature distribution
Electrolytes
Students
Costs

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Edwards, R., Demetrio, T., & Johnson, D. H. (2011). Resurrecting the electrolytic plotting tank. In 118th ASEE Annual Conference and Exposition
Edwards, Robert ; Demetrio, Tim ; Johnson, David H. / Resurrecting the electrolytic plotting tank. 118th ASEE Annual Conference and Exposition. 2011.
@inproceedings{bf8ddf8357284fe791393321b4f54c20,
title = "Resurrecting the electrolytic plotting tank",
abstract = "Before the advent of CFD software, electrolytic plotting tanks were used extensively to plot three-dimensional heat transfer and fluid flow fields. The theory behind these tanks is the well know electrical analogy between electrical fields and temperature or flow fields based on the Laplace equation. These tanks have been essentially replaced with modern computational methods. As part of a student project, a set of small plotting tanks were designed and built to use as a heat transfer lab on two-dimensional conduction. These particular tanks have been designed to simulate a variety of boundary conditions. Readily available saline solution is used as the electrolyte. In order to simplify the plotting, and to reduce the over cost a modified common pencil is used as the probe, and the plot is made directly on a sheet of paper at the bottom of the container. Boundary conditions are simulated using up to 5 volts DC. This paper describes the development of these devices and the test results. Results have been compared to finite difference plots and to ANSYS plots to verify that the tanks are working as intended, and these results are included in the paper. The simple tanks yield results very close to the analytical methods. Also included in the paper is a brief history of electrolytic plotting tanks, the relevant theory and a description of a potential lab exercise using these tanks.",
author = "Robert Edwards and Tim Demetrio and Johnson, {David H.}",
year = "2011",
language = "English (US)",
booktitle = "118th ASEE Annual Conference and Exposition",

}

Edwards, R, Demetrio, T & Johnson, DH 2011, Resurrecting the electrolytic plotting tank. in 118th ASEE Annual Conference and Exposition. 118th ASEE Annual Conference and Exposition, Vancouver, BC, Canada, 6/26/11.

Resurrecting the electrolytic plotting tank. / Edwards, Robert; Demetrio, Tim; Johnson, David H.

118th ASEE Annual Conference and Exposition. 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Resurrecting the electrolytic plotting tank

AU - Edwards, Robert

AU - Demetrio, Tim

AU - Johnson, David H.

PY - 2011

Y1 - 2011

N2 - Before the advent of CFD software, electrolytic plotting tanks were used extensively to plot three-dimensional heat transfer and fluid flow fields. The theory behind these tanks is the well know electrical analogy between electrical fields and temperature or flow fields based on the Laplace equation. These tanks have been essentially replaced with modern computational methods. As part of a student project, a set of small plotting tanks were designed and built to use as a heat transfer lab on two-dimensional conduction. These particular tanks have been designed to simulate a variety of boundary conditions. Readily available saline solution is used as the electrolyte. In order to simplify the plotting, and to reduce the over cost a modified common pencil is used as the probe, and the plot is made directly on a sheet of paper at the bottom of the container. Boundary conditions are simulated using up to 5 volts DC. This paper describes the development of these devices and the test results. Results have been compared to finite difference plots and to ANSYS plots to verify that the tanks are working as intended, and these results are included in the paper. The simple tanks yield results very close to the analytical methods. Also included in the paper is a brief history of electrolytic plotting tanks, the relevant theory and a description of a potential lab exercise using these tanks.

AB - Before the advent of CFD software, electrolytic plotting tanks were used extensively to plot three-dimensional heat transfer and fluid flow fields. The theory behind these tanks is the well know electrical analogy between electrical fields and temperature or flow fields based on the Laplace equation. These tanks have been essentially replaced with modern computational methods. As part of a student project, a set of small plotting tanks were designed and built to use as a heat transfer lab on two-dimensional conduction. These particular tanks have been designed to simulate a variety of boundary conditions. Readily available saline solution is used as the electrolyte. In order to simplify the plotting, and to reduce the over cost a modified common pencil is used as the probe, and the plot is made directly on a sheet of paper at the bottom of the container. Boundary conditions are simulated using up to 5 volts DC. This paper describes the development of these devices and the test results. Results have been compared to finite difference plots and to ANSYS plots to verify that the tanks are working as intended, and these results are included in the paper. The simple tanks yield results very close to the analytical methods. Also included in the paper is a brief history of electrolytic plotting tanks, the relevant theory and a description of a potential lab exercise using these tanks.

UR - http://www.scopus.com/inward/record.url?scp=80051902557&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80051902557&partnerID=8YFLogxK

M3 - Conference contribution

BT - 118th ASEE Annual Conference and Exposition

ER -

Edwards R, Demetrio T, Johnson DH. Resurrecting the electrolytic plotting tank. In 118th ASEE Annual Conference and Exposition. 2011