Rotor blade shed ice length prediction

Jared Soltis, Jose Palacios

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Shed ice from rotor blades is a potential ballistic concern for rotorcraft. Ice projectiles could damage the tail rotor or fuselage, and shed ice could also be ingested by the engine. Substantial research has already been conducted in the areas of ice adhesion strength, shedding, projectile trajectories, and impact damage. Work on predicting the shed ice size as it slides offa rotating blade will be discussed in this paper. An Euler-Bernoulli beam model was developed to predict the ice length of shed ice as it is removed from the rotor under the effect of centrifugal forces. The model was validated with experiments conducted at the Adverse Environment Rotor Test Stand at the Pennsylvania State University. The ultimate tensile strength of the ice was experimentally measured, given the scattered ice tensile strength data found in the literature. It was found that the ultimate tensile strength on impact ice at the tested condition was 0.597 MPa with a standard deviation of 28%. High-speed cameras captured the ice break up for size quantification. The model was able to predict the ice length of fragmented shed ice within 22%.

Original languageEnglish (US)
Title of host publication72nd American Helicopter Society International Annual Forum 2016
Subtitle of host publicationLeveraging Emerging Technologies for Future Capabilities
PublisherAmerican Helicopter Society
Pages2693-2711
Number of pages19
ISBN (Electronic)9781510825062
StatePublished - Jan 1 2016

Publication series

NameAnnual Forum Proceedings - AHS International
Volume4
ISSN (Print)1552-2938

Fingerprint

Turbomachine blades
Ice
Rotors
Tensile strength
Projectiles
Fuselages
High speed cameras
Bond strength (materials)
Ballistics
Trajectories
Engines

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Soltis, J., & Palacios, J. (2016). Rotor blade shed ice length prediction. In 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities (pp. 2693-2711). (Annual Forum Proceedings - AHS International; Vol. 4). American Helicopter Society.
Soltis, Jared ; Palacios, Jose. / Rotor blade shed ice length prediction. 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities. American Helicopter Society, 2016. pp. 2693-2711 (Annual Forum Proceedings - AHS International).
@inproceedings{8644f345dc2449848d3ec787a245b5e9,
title = "Rotor blade shed ice length prediction",
abstract = "Shed ice from rotor blades is a potential ballistic concern for rotorcraft. Ice projectiles could damage the tail rotor or fuselage, and shed ice could also be ingested by the engine. Substantial research has already been conducted in the areas of ice adhesion strength, shedding, projectile trajectories, and impact damage. Work on predicting the shed ice size as it slides offa rotating blade will be discussed in this paper. An Euler-Bernoulli beam model was developed to predict the ice length of shed ice as it is removed from the rotor under the effect of centrifugal forces. The model was validated with experiments conducted at the Adverse Environment Rotor Test Stand at the Pennsylvania State University. The ultimate tensile strength of the ice was experimentally measured, given the scattered ice tensile strength data found in the literature. It was found that the ultimate tensile strength on impact ice at the tested condition was 0.597 MPa with a standard deviation of 28{\%}. High-speed cameras captured the ice break up for size quantification. The model was able to predict the ice length of fragmented shed ice within 22{\%}.",
author = "Jared Soltis and Jose Palacios",
year = "2016",
month = "1",
day = "1",
language = "English (US)",
series = "Annual Forum Proceedings - AHS International",
publisher = "American Helicopter Society",
pages = "2693--2711",
booktitle = "72nd American Helicopter Society International Annual Forum 2016",
address = "United States",

}

Soltis, J & Palacios, J 2016, Rotor blade shed ice length prediction. in 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities. Annual Forum Proceedings - AHS International, vol. 4, American Helicopter Society, pp. 2693-2711.

Rotor blade shed ice length prediction. / Soltis, Jared; Palacios, Jose.

72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities. American Helicopter Society, 2016. p. 2693-2711 (Annual Forum Proceedings - AHS International; Vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Rotor blade shed ice length prediction

AU - Soltis, Jared

AU - Palacios, Jose

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Shed ice from rotor blades is a potential ballistic concern for rotorcraft. Ice projectiles could damage the tail rotor or fuselage, and shed ice could also be ingested by the engine. Substantial research has already been conducted in the areas of ice adhesion strength, shedding, projectile trajectories, and impact damage. Work on predicting the shed ice size as it slides offa rotating blade will be discussed in this paper. An Euler-Bernoulli beam model was developed to predict the ice length of shed ice as it is removed from the rotor under the effect of centrifugal forces. The model was validated with experiments conducted at the Adverse Environment Rotor Test Stand at the Pennsylvania State University. The ultimate tensile strength of the ice was experimentally measured, given the scattered ice tensile strength data found in the literature. It was found that the ultimate tensile strength on impact ice at the tested condition was 0.597 MPa with a standard deviation of 28%. High-speed cameras captured the ice break up for size quantification. The model was able to predict the ice length of fragmented shed ice within 22%.

AB - Shed ice from rotor blades is a potential ballistic concern for rotorcraft. Ice projectiles could damage the tail rotor or fuselage, and shed ice could also be ingested by the engine. Substantial research has already been conducted in the areas of ice adhesion strength, shedding, projectile trajectories, and impact damage. Work on predicting the shed ice size as it slides offa rotating blade will be discussed in this paper. An Euler-Bernoulli beam model was developed to predict the ice length of shed ice as it is removed from the rotor under the effect of centrifugal forces. The model was validated with experiments conducted at the Adverse Environment Rotor Test Stand at the Pennsylvania State University. The ultimate tensile strength of the ice was experimentally measured, given the scattered ice tensile strength data found in the literature. It was found that the ultimate tensile strength on impact ice at the tested condition was 0.597 MPa with a standard deviation of 28%. High-speed cameras captured the ice break up for size quantification. The model was able to predict the ice length of fragmented shed ice within 22%.

UR - http://www.scopus.com/inward/record.url?scp=85001842921&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85001842921&partnerID=8YFLogxK

M3 - Conference contribution

T3 - Annual Forum Proceedings - AHS International

SP - 2693

EP - 2711

BT - 72nd American Helicopter Society International Annual Forum 2016

PB - American Helicopter Society

ER -

Soltis J, Palacios J. Rotor blade shed ice length prediction. In 72nd American Helicopter Society International Annual Forum 2016: Leveraging Emerging Technologies for Future Capabilities. American Helicopter Society. 2016. p. 2693-2711. (Annual Forum Proceedings - AHS International).