Scale and numerical modeling of an air-based density separator

Tathagata Ghosh, Mohammad Rezaee, Rick Q. Honaker, Kozo Saito

Research output: Chapter in Book/Report/Conference proceedingChapter

7 Scopus citations

Abstract

The development of an air-based density separator for effectively treating finer-size fraction (6 mm × 1 mm) of run-of-mine coal is essential for the industry. Based on the derived scaling laws, the full-scale model of a laboratory air-based density separator and a prototype model scaled down by the factor of ½ in the X, Y, and Z directions were simulated using numerical methods. The air velocity contour plots, vector plots, and turbulent intensity values were used to validate the scaling laws. The absolute percent difference of air velocity between the two models was 3.83 %. In addition to this finding, the air velocity contour and vector plot and the turbulent intensity contours in two models showed modest variation, thereby indicating the validity of the scaling laws. The publication details the development of the full-scale and the prototype numerical models and the correlation of the derived scaling laws with the numerical and the experimental results.

Original languageEnglish (US)
Title of host publicationProgress in Scale Modeling, Volume II
Subtitle of host publicationSelections from the International Symposia on Scale Modeling, ISSM VI (2009) and ISSM VII (2013)
PublisherSpringer International Publishing
Pages225-238
Number of pages14
ISBN (Electronic)9783319103082
ISBN (Print)9783319103075
DOIs
StatePublished - Jan 1 2015

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Scale and numerical modeling of an air-based density separator'. Together they form a unique fingerprint.

  • Cite this

    Ghosh, T., Rezaee, M., Honaker, R. Q., & Saito, K. (2015). Scale and numerical modeling of an air-based density separator. In Progress in Scale Modeling, Volume II: Selections from the International Symposia on Scale Modeling, ISSM VI (2009) and ISSM VII (2013) (pp. 225-238). Springer International Publishing. https://doi.org/10.1007/978-3-319-10308-2_18