Sintering behavior, microstructure and mechanical properties of vacuum sintered SiC/spinel nanocomposite

Research output: Contribution to journalArticle

9 Scopus citations

Abstract

A mixture of SiC and spinel (MgAl2O4) nanopowder was prepared through the ball milling of talc, aluminum and graphite powder. The powder was uniaxially pressed into the form of pellets and the prepared specimens were annealed at various temperatures for different holding times. The prepared samples were investigated through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), nanoindentation test, cold crushing strength (CCS) test and Archimedes principle test. The obtained results showed that the hardness, CCS and bulk density did not follow the same trend at different temperatures due to the interaction among various parameters. The detailed investigation of microstructure, phase changes and experimental conditions revealed the mechanisms behind these behaviors. The best sample obtained after annealing at 1200 °C for 1 h in vacuum had the mean hardness of 1.6 GPa and the mean CCS of 118 MPa.

Original languageEnglish (US)
Pages (from-to)204-210
Number of pages7
JournalJournal of Alloys and Compounds
Volume615
DOIs
StatePublished - Dec 5 2014

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Sintering behavior, microstructure and mechanical properties of vacuum sintered SiC/spinel nanocomposite'. Together they form a unique fingerprint.

  • Cite this