Sliding-mode observers with compound manifolds for the induction motor

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

The paper discusses the problem of speed and flux estimation for the induction motor (IM) drive and presents a series of Sliding Mode Observers (SMOs) that are constructed using compound manifolds. Observers with compound manifolds have not been widely investigated because they cannot be designed following a standard procedure; however, it is shown that they have unique and useful properties. The paper introduces the candidate manifolds associated with IM estimation and shows various approaches for designing SMOs with compound manifolds. Generally, using the IM model, it is typical to design observers with simple manifolds. However, since the state transition matrix of the IM model depends on the motor speed, the problem is more complicated - the speed must either be known or it must be estimated. In the paper, several sensored and sensorless observer designs are presented. The paper presents the theoretical developments and shows simulations and experimental results.

Original languageEnglish (US)
Pages (from-to)224-256
Number of pages33
JournalInternational Journal of Power Electronics
Volume6
Issue number3
DOIs
StatePublished - Jan 1 2014

Fingerprint

Induction motors
Fluxes

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

@article{ecc08ee3d23045b4a8df7c7d7903c23f,
title = "Sliding-mode observers with compound manifolds for the induction motor",
abstract = "The paper discusses the problem of speed and flux estimation for the induction motor (IM) drive and presents a series of Sliding Mode Observers (SMOs) that are constructed using compound manifolds. Observers with compound manifolds have not been widely investigated because they cannot be designed following a standard procedure; however, it is shown that they have unique and useful properties. The paper introduces the candidate manifolds associated with IM estimation and shows various approaches for designing SMOs with compound manifolds. Generally, using the IM model, it is typical to design observers with simple manifolds. However, since the state transition matrix of the IM model depends on the motor speed, the problem is more complicated - the speed must either be known or it must be estimated. In the paper, several sensored and sensorless observer designs are presented. The paper presents the theoretical developments and shows simulations and experimental results.",
author = "Mihai Comanescu",
year = "2014",
month = "1",
day = "1",
doi = "10.1504/IJPELEC.2014.064642",
language = "English (US)",
volume = "6",
pages = "224--256",
journal = "International Journal of Power Electronics",
issn = "1756-638X",
publisher = "Inderscience Publishers",
number = "3",

}

Sliding-mode observers with compound manifolds for the induction motor. / Comanescu, Mihai.

In: International Journal of Power Electronics, Vol. 6, No. 3, 01.01.2014, p. 224-256.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Sliding-mode observers with compound manifolds for the induction motor

AU - Comanescu, Mihai

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The paper discusses the problem of speed and flux estimation for the induction motor (IM) drive and presents a series of Sliding Mode Observers (SMOs) that are constructed using compound manifolds. Observers with compound manifolds have not been widely investigated because they cannot be designed following a standard procedure; however, it is shown that they have unique and useful properties. The paper introduces the candidate manifolds associated with IM estimation and shows various approaches for designing SMOs with compound manifolds. Generally, using the IM model, it is typical to design observers with simple manifolds. However, since the state transition matrix of the IM model depends on the motor speed, the problem is more complicated - the speed must either be known or it must be estimated. In the paper, several sensored and sensorless observer designs are presented. The paper presents the theoretical developments and shows simulations and experimental results.

AB - The paper discusses the problem of speed and flux estimation for the induction motor (IM) drive and presents a series of Sliding Mode Observers (SMOs) that are constructed using compound manifolds. Observers with compound manifolds have not been widely investigated because they cannot be designed following a standard procedure; however, it is shown that they have unique and useful properties. The paper introduces the candidate manifolds associated with IM estimation and shows various approaches for designing SMOs with compound manifolds. Generally, using the IM model, it is typical to design observers with simple manifolds. However, since the state transition matrix of the IM model depends on the motor speed, the problem is more complicated - the speed must either be known or it must be estimated. In the paper, several sensored and sensorless observer designs are presented. The paper presents the theoretical developments and shows simulations and experimental results.

UR - http://www.scopus.com/inward/record.url?scp=84907011350&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84907011350&partnerID=8YFLogxK

U2 - 10.1504/IJPELEC.2014.064642

DO - 10.1504/IJPELEC.2014.064642

M3 - Article

AN - SCOPUS:84907011350

VL - 6

SP - 224

EP - 256

JO - International Journal of Power Electronics

JF - International Journal of Power Electronics

SN - 1756-638X

IS - 3

ER -