Solid polymeric electrolytes based on crosslinked MEEP-type materials

Harry R. Allcock, C. J. Nelson, W. D. Coggio

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

The work described here discusses the development of methods to crosslink the polymer chains while,at the same time,avoiding contamination by conductive impurities and maintaining the relatively high room temperature conductivity of MEEP/lithium triflate electrolytes. Crosslinking after the formation of the MEEP/lithium triflate films, was considered to be an essential prerequisite to allow the fabrication of the electrolyte in the form of large surface area batteries or in intricately shaped devices.

Original languageEnglish (US)
Title of host publicationPolymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering
PublisherPubl by ACS
Pages76-77
Number of pages2
Volume68
ISBN (Print)0841226644
StatePublished - 1993
EventProceedings of the American Chemical Society Division of Polymeric Materials - Science and Engineering - Denver, CO, USA
Duration: Apr 18 1993Apr 23 1993

Other

OtherProceedings of the American Chemical Society Division of Polymeric Materials - Science and Engineering
CityDenver, CO, USA
Period4/18/934/23/93

Fingerprint

Lithium
Electrolytes
Crosslinking
Polymers
Contamination
Impurities
Fabrication
Temperature

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Polymers and Plastics

Cite this

Allcock, H. R., Nelson, C. J., & Coggio, W. D. (1993). Solid polymeric electrolytes based on crosslinked MEEP-type materials. In Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering (Vol. 68, pp. 76-77). Publ by ACS.
Allcock, Harry R. ; Nelson, C. J. ; Coggio, W. D. / Solid polymeric electrolytes based on crosslinked MEEP-type materials. Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Vol. 68 Publ by ACS, 1993. pp. 76-77
@inproceedings{fab01c2134604ceaac9297ac136b7730,
title = "Solid polymeric electrolytes based on crosslinked MEEP-type materials",
abstract = "The work described here discusses the development of methods to crosslink the polymer chains while,at the same time,avoiding contamination by conductive impurities and maintaining the relatively high room temperature conductivity of MEEP/lithium triflate electrolytes. Crosslinking after the formation of the MEEP/lithium triflate films, was considered to be an essential prerequisite to allow the fabrication of the electrolyte in the form of large surface area batteries or in intricately shaped devices.",
author = "Allcock, {Harry R.} and Nelson, {C. J.} and Coggio, {W. D.}",
year = "1993",
language = "English (US)",
isbn = "0841226644",
volume = "68",
pages = "76--77",
booktitle = "Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering",
publisher = "Publ by ACS",

}

Allcock, HR, Nelson, CJ & Coggio, WD 1993, Solid polymeric electrolytes based on crosslinked MEEP-type materials. in Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. vol. 68, Publ by ACS, pp. 76-77, Proceedings of the American Chemical Society Division of Polymeric Materials - Science and Engineering, Denver, CO, USA, 4/18/93.

Solid polymeric electrolytes based on crosslinked MEEP-type materials. / Allcock, Harry R.; Nelson, C. J.; Coggio, W. D.

Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Vol. 68 Publ by ACS, 1993. p. 76-77.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Solid polymeric electrolytes based on crosslinked MEEP-type materials

AU - Allcock, Harry R.

AU - Nelson, C. J.

AU - Coggio, W. D.

PY - 1993

Y1 - 1993

N2 - The work described here discusses the development of methods to crosslink the polymer chains while,at the same time,avoiding contamination by conductive impurities and maintaining the relatively high room temperature conductivity of MEEP/lithium triflate electrolytes. Crosslinking after the formation of the MEEP/lithium triflate films, was considered to be an essential prerequisite to allow the fabrication of the electrolyte in the form of large surface area batteries or in intricately shaped devices.

AB - The work described here discusses the development of methods to crosslink the polymer chains while,at the same time,avoiding contamination by conductive impurities and maintaining the relatively high room temperature conductivity of MEEP/lithium triflate electrolytes. Crosslinking after the formation of the MEEP/lithium triflate films, was considered to be an essential prerequisite to allow the fabrication of the electrolyte in the form of large surface area batteries or in intricately shaped devices.

UR - http://www.scopus.com/inward/record.url?scp=0027309927&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027309927&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0027309927

SN - 0841226644

VL - 68

SP - 76

EP - 77

BT - Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering

PB - Publ by ACS

ER -

Allcock HR, Nelson CJ, Coggio WD. Solid polymeric electrolytes based on crosslinked MEEP-type materials. In Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Materials Science and Engineering. Vol. 68. Publ by ACS. 1993. p. 76-77