Solution-based aerosol deposition process for synthesis of multilayer structures

Christian E. Folgar, Carlos Suchicital, Shashank Priya

Research output: Contribution to journalArticlepeer-review

19 Scopus citations

Abstract

In this paper, we report the progress on 3D aerosol deposition of barium titanate (BTO) based multilayer ceramic capacitors (MLCC) using an automated process. Solution-based aerosol deposition is a promising direct-write method to produce three-dimensional (3D) structures at low temperatures. We utilize the combination of solution-based aerosol process and selective laser sintering (SLS) to develop 3D structures. The MLCC structure was synthesized on silicon substrate consisting of alternate layers of 0.5-1.0 μm thick silver electrode layer and 0.5-2 μm thick BTO ceramic. The effect of incident laser power subsequent to deposition (in the range of 105 mW and 930 mW) was systematically investigated revealing the changes in grain morphology as a function of local sintering. The results of this study are promising for development of on-substrate thin/thick film MLCCs.

Original languageEnglish (US)
Pages (from-to)1302-1307
Number of pages6
JournalMaterials Letters
Volume65
Issue number9
DOIs
StatePublished - May 15 2011

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Solution-based aerosol deposition process for synthesis of multilayer structures'. Together they form a unique fingerprint.

Cite this