Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole

El-amine Lehtihet, U. N. Gunasena, R. Weill

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This paper starts with experimental observations regarding positional and size errors when drilling holes. Based on these observations, statistical models relating production errors to position tolerance of a hole are presented. 2-D models for RFS and MMC position tolerance specifications are developed. Modeling is extended to a special 3-D case including orientation errors. Numerical applications show the effects of various parameters on the probability or an acceptable hole. Use of a simulation package for the solution of these problems is also discussed. These models and solutions may help manufacturing select equipment with the accuracy and precision required to meet design tolerance specification.

Original languageEnglish (US)
Pages (from-to)569-572
Number of pages4
JournalCIRP Annals - Manufacturing Technology
Volume39
Issue number1
DOIs
StatePublished - Jan 1 1990

Fingerprint

Specifications
Drilling
Statistical Models

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{1b309b50451e40dea5e1e8c3511bf1ca,
title = "Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole",
abstract = "This paper starts with experimental observations regarding positional and size errors when drilling holes. Based on these observations, statistical models relating production errors to position tolerance of a hole are presented. 2-D models for RFS and MMC position tolerance specifications are developed. Modeling is extended to a special 3-D case including orientation errors. Numerical applications show the effects of various parameters on the probability or an acceptable hole. Use of a simulation package for the solution of these problems is also discussed. These models and solutions may help manufacturing select equipment with the accuracy and precision required to meet design tolerance specification.",
author = "El-amine Lehtihet and Gunasena, {U. N.} and R. Weill",
year = "1990",
month = "1",
day = "1",
doi = "10.1016/S0007-8506(07)61121-4",
language = "English (US)",
volume = "39",
pages = "569--572",
journal = "CIRP Annals - Manufacturing Technology",
issn = "0007-8506",
publisher = "Elsevier USA",
number = "1",

}

Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole. / Lehtihet, El-amine; Gunasena, U. N.; Weill, R.

In: CIRP Annals - Manufacturing Technology, Vol. 39, No. 1, 01.01.1990, p. 569-572.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Statistical Models for the Relationship between Production Errors and the Position Tolerance of a Hole

AU - Lehtihet, El-amine

AU - Gunasena, U. N.

AU - Weill, R.

PY - 1990/1/1

Y1 - 1990/1/1

N2 - This paper starts with experimental observations regarding positional and size errors when drilling holes. Based on these observations, statistical models relating production errors to position tolerance of a hole are presented. 2-D models for RFS and MMC position tolerance specifications are developed. Modeling is extended to a special 3-D case including orientation errors. Numerical applications show the effects of various parameters on the probability or an acceptable hole. Use of a simulation package for the solution of these problems is also discussed. These models and solutions may help manufacturing select equipment with the accuracy and precision required to meet design tolerance specification.

AB - This paper starts with experimental observations regarding positional and size errors when drilling holes. Based on these observations, statistical models relating production errors to position tolerance of a hole are presented. 2-D models for RFS and MMC position tolerance specifications are developed. Modeling is extended to a special 3-D case including orientation errors. Numerical applications show the effects of various parameters on the probability or an acceptable hole. Use of a simulation package for the solution of these problems is also discussed. These models and solutions may help manufacturing select equipment with the accuracy and precision required to meet design tolerance specification.

UR - http://www.scopus.com/inward/record.url?scp=0010909010&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0010909010&partnerID=8YFLogxK

U2 - 10.1016/S0007-8506(07)61121-4

DO - 10.1016/S0007-8506(07)61121-4

M3 - Article

VL - 39

SP - 569

EP - 572

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

SN - 0007-8506

IS - 1

ER -