Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment

Leonid Frayman; Stephen Quinn; Arthur Jones; Andrew Serafini; Daudi Waryoba

Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment

Leonid Frayman, Stephen Quinn, Arthur Jones, Andrew Serafini, Daudi Waryoba

Penn State DuBois

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Scopus citations

Abstract

Newly developed hybrid post-sinter processing, which is comprising partial copper infiltration with subsequent partial vacuum impregnation by inorganic compounds, provides viable alternative cost-efficient solution for residual porosity sealing within microstructure of powder metal (PM) artifacts from PM steels while simultaneously enhancing its mechanical characteristics and corrosion properties. Obtained data on effect of aforementioned hybrid post-processing of artifacts from several PM steels, which have been finally heat treated, are presented and discussed.

Original language	English (US)
Title of host publication	Advances in Powder Metallurgy and Particulate Materials - 2018
Subtitle of host publication	Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018
Publisher	Metal Powder Industries Federation
Pages	399-414
Number of pages	16
ISBN (Electronic)	9781943694181
State	Published - Jan 1 2018
Event	2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 - San Antonio, United States Duration: Jun 17 2018 → Jun 20 2018

Publication series

Name	Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018
Volume	2018-June

Conference

Conference	2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018
Country/Territory	United States
City	San Antonio
Period	6/17/18 → 6/20/18

All Science Journal Classification (ASJC) codes

Metals and Alloys
Materials Chemistry
Surfaces and Interfaces

Cite this

Frayman, L., Quinn, S., Jones, A., Serafini, A., & Waryoba, D. (2018). Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment. In Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (pp. 399-414). (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; Vol. 2018-June). Metal Powder Industries Federation.

Frayman, Leonid ; Quinn, Stephen ; Jones, Arthur et al. / Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment. Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, 2018. pp. 399-414 (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018).

@inproceedings{6b730fe95213414489558cf01a87aae4,

title = "Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment",

abstract = "Newly developed hybrid post-sinter processing, which is comprising partial copper infiltration with subsequent partial vacuum impregnation by inorganic compounds, provides viable alternative cost-efficient solution for residual porosity sealing within microstructure of powder metal (PM) artifacts from PM steels while simultaneously enhancing its mechanical characteristics and corrosion properties. Obtained data on effect of aforementioned hybrid post-processing of artifacts from several PM steels, which have been finally heat treated, are presented and discussed.",

author = "Leonid Frayman and Stephen Quinn and Arthur Jones and Andrew Serafini and Daudi Waryoba",

year = "2018",

month = jan,

day = "1",

language = "English (US)",

series = "Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018",

publisher = "Metal Powder Industries Federation",

pages = "399--414",

booktitle = "Advances in Powder Metallurgy and Particulate Materials - 2018",

note = "2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 ; Conference date: 17-06-2018 Through 20-06-2018",

}

Frayman, L, Quinn, S, Jones, A, Serafini, A & Waryoba, D 2018, Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment. in Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018, vol. 2018-June, Metal Powder Industries Federation, pp. 399-414, 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018, San Antonio, United States, 6/17/18.

Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment. / Frayman, Leonid; Quinn, Stephen; Jones, Arthur et al.
Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation, 2018. p. 399-414 (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018; Vol. 2018-June).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment

AU - Frayman, Leonid

AU - Quinn, Stephen

AU - Jones, Arthur

AU - Serafini, Andrew

AU - Waryoba, Daudi

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Newly developed hybrid post-sinter processing, which is comprising partial copper infiltration with subsequent partial vacuum impregnation by inorganic compounds, provides viable alternative cost-efficient solution for residual porosity sealing within microstructure of powder metal (PM) artifacts from PM steels while simultaneously enhancing its mechanical characteristics and corrosion properties. Obtained data on effect of aforementioned hybrid post-processing of artifacts from several PM steels, which have been finally heat treated, are presented and discussed.

AB - Newly developed hybrid post-sinter processing, which is comprising partial copper infiltration with subsequent partial vacuum impregnation by inorganic compounds, provides viable alternative cost-efficient solution for residual porosity sealing within microstructure of powder metal (PM) artifacts from PM steels while simultaneously enhancing its mechanical characteristics and corrosion properties. Obtained data on effect of aforementioned hybrid post-processing of artifacts from several PM steels, which have been finally heat treated, are presented and discussed.

UR - http://www.scopus.com/inward/record.url?scp=85072835500&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072835500&partnerID=8YFLogxK

M3 - Conference contribution

T3 - Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018

SP - 399

EP - 414

BT - Advances in Powder Metallurgy and Particulate Materials - 2018

PB - Metal Powder Industries Federation

T2 - 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018

Y2 - 17 June 2018 through 20 June 2018

ER -

Frayman L, Quinn S, Jones A, Serafini A, Waryoba D. Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment. In Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018. Metal Powder Industries Federation. 2018. p. 399-414. (Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018).

Study on microstructure, mechanical characteristics and corrosion performance of artifacts, being processed by post sinter hybrid porosity sealing and subsequent heat treatment

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Other files and links

Fingerprint

Cite this