Subcritical water reactions of lignin-related model compounds with nitrogen, hydrogen, carbon monoxide, and carbon dioxide gases

Meredith A. Hill Bembenic, Caroline Elaine Clifford

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Experiments using subcritical H2O (365 °C) and various industrial gases (500 psi cold pressure of N2, H2, CO, or CO2) have been considered previously for the conversion of Organosolv lignin (representative of lignin-derived compounds generated from the production of bioethanol from woody biomass sources) into value-added products. The findings indicated that subcritical H2O can be used to depolymerize lignin into GC amenable compounds with or without added gas pressures, though adding gas further modified the types of products generated. However, the roles of the combined effect of subcritical H2O and the gases were not confirmed, as the reaction chemistry for lignin depolymerization at these conditions is not intuitive. Thus, experiments with subcritical H 2O, the aforementioned industrial gases and lignin-related model compounds (i.e., aromatic aldehydes represented by vanillin and syringaldehyde, aromatic ketones represented by acetovanillone and acetosyringone, and aromatic ethers represented by dibenzyl ether and 2-phenethyl phenyl ether), were completed to study this. From these results, the suggested reaction pathway of Organosolv lignin reactions in subcritical H2O with and without added pressure appears to proceed in two stages. The first stage appears to be a hydrolysis reaction that breaks the ether linkages between lignin aromatic monomers with typical methoxy and hydroxyl functional groups and either an aldehyde or ketone (i.e., syringaldehyde, acetophenone). A second stage appears to remove the aldehyde/ketone so that the main products are methoxy phenols.

Original languageEnglish (US)
Pages (from-to)6681-6694
Number of pages14
JournalEnergy and Fuels
Volume27
Issue number11
DOIs
StatePublished - Nov 21 2013

Fingerprint

Lignin
Carbon Monoxide
Carbon Dioxide
Carbon monoxide
Hydrogen
Carbon dioxide
Nitrogen
Gases
Water
Ethers
Ketones
Aldehydes
Bioethanol
Depolymerization
Aromatic compounds
Phenols
Hydroxyl Radical
Ether
Functional groups
Hydrolysis

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology

Cite this

@article{3245b9af08944097af94c5ee4e6cb0ca,
title = "Subcritical water reactions of lignin-related model compounds with nitrogen, hydrogen, carbon monoxide, and carbon dioxide gases",
abstract = "Experiments using subcritical H2O (365 °C) and various industrial gases (500 psi cold pressure of N2, H2, CO, or CO2) have been considered previously for the conversion of Organosolv lignin (representative of lignin-derived compounds generated from the production of bioethanol from woody biomass sources) into value-added products. The findings indicated that subcritical H2O can be used to depolymerize lignin into GC amenable compounds with or without added gas pressures, though adding gas further modified the types of products generated. However, the roles of the combined effect of subcritical H2O and the gases were not confirmed, as the reaction chemistry for lignin depolymerization at these conditions is not intuitive. Thus, experiments with subcritical H 2O, the aforementioned industrial gases and lignin-related model compounds (i.e., aromatic aldehydes represented by vanillin and syringaldehyde, aromatic ketones represented by acetovanillone and acetosyringone, and aromatic ethers represented by dibenzyl ether and 2-phenethyl phenyl ether), were completed to study this. From these results, the suggested reaction pathway of Organosolv lignin reactions in subcritical H2O with and without added pressure appears to proceed in two stages. The first stage appears to be a hydrolysis reaction that breaks the ether linkages between lignin aromatic monomers with typical methoxy and hydroxyl functional groups and either an aldehyde or ketone (i.e., syringaldehyde, acetophenone). A second stage appears to remove the aldehyde/ketone so that the main products are methoxy phenols.",
author = "{Hill Bembenic}, {Meredith A.} and Clifford, {Caroline Elaine}",
year = "2013",
month = "11",
day = "21",
doi = "10.1021/ef401113a",
language = "English (US)",
volume = "27",
pages = "6681--6694",
journal = "Energy & Fuels",
issn = "0887-0624",
publisher = "American Chemical Society",
number = "11",

}

Subcritical water reactions of lignin-related model compounds with nitrogen, hydrogen, carbon monoxide, and carbon dioxide gases. / Hill Bembenic, Meredith A.; Clifford, Caroline Elaine.

In: Energy and Fuels, Vol. 27, No. 11, 21.11.2013, p. 6681-6694.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Subcritical water reactions of lignin-related model compounds with nitrogen, hydrogen, carbon monoxide, and carbon dioxide gases

AU - Hill Bembenic, Meredith A.

AU - Clifford, Caroline Elaine

PY - 2013/11/21

Y1 - 2013/11/21

N2 - Experiments using subcritical H2O (365 °C) and various industrial gases (500 psi cold pressure of N2, H2, CO, or CO2) have been considered previously for the conversion of Organosolv lignin (representative of lignin-derived compounds generated from the production of bioethanol from woody biomass sources) into value-added products. The findings indicated that subcritical H2O can be used to depolymerize lignin into GC amenable compounds with or without added gas pressures, though adding gas further modified the types of products generated. However, the roles of the combined effect of subcritical H2O and the gases were not confirmed, as the reaction chemistry for lignin depolymerization at these conditions is not intuitive. Thus, experiments with subcritical H 2O, the aforementioned industrial gases and lignin-related model compounds (i.e., aromatic aldehydes represented by vanillin and syringaldehyde, aromatic ketones represented by acetovanillone and acetosyringone, and aromatic ethers represented by dibenzyl ether and 2-phenethyl phenyl ether), were completed to study this. From these results, the suggested reaction pathway of Organosolv lignin reactions in subcritical H2O with and without added pressure appears to proceed in two stages. The first stage appears to be a hydrolysis reaction that breaks the ether linkages between lignin aromatic monomers with typical methoxy and hydroxyl functional groups and either an aldehyde or ketone (i.e., syringaldehyde, acetophenone). A second stage appears to remove the aldehyde/ketone so that the main products are methoxy phenols.

AB - Experiments using subcritical H2O (365 °C) and various industrial gases (500 psi cold pressure of N2, H2, CO, or CO2) have been considered previously for the conversion of Organosolv lignin (representative of lignin-derived compounds generated from the production of bioethanol from woody biomass sources) into value-added products. The findings indicated that subcritical H2O can be used to depolymerize lignin into GC amenable compounds with or without added gas pressures, though adding gas further modified the types of products generated. However, the roles of the combined effect of subcritical H2O and the gases were not confirmed, as the reaction chemistry for lignin depolymerization at these conditions is not intuitive. Thus, experiments with subcritical H 2O, the aforementioned industrial gases and lignin-related model compounds (i.e., aromatic aldehydes represented by vanillin and syringaldehyde, aromatic ketones represented by acetovanillone and acetosyringone, and aromatic ethers represented by dibenzyl ether and 2-phenethyl phenyl ether), were completed to study this. From these results, the suggested reaction pathway of Organosolv lignin reactions in subcritical H2O with and without added pressure appears to proceed in two stages. The first stage appears to be a hydrolysis reaction that breaks the ether linkages between lignin aromatic monomers with typical methoxy and hydroxyl functional groups and either an aldehyde or ketone (i.e., syringaldehyde, acetophenone). A second stage appears to remove the aldehyde/ketone so that the main products are methoxy phenols.

UR - http://www.scopus.com/inward/record.url?scp=84888324692&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84888324692&partnerID=8YFLogxK

U2 - 10.1021/ef401113a

DO - 10.1021/ef401113a

M3 - Article

VL - 27

SP - 6681

EP - 6694

JO - Energy & Fuels

JF - Energy & Fuels

SN - 0887-0624

IS - 11

ER -