Tenax extraction of sediments to estimate desorption and bioavailability of hydrophobic contaminants: A literature review

Michael J. Lydy, Amanda D. Harwood, Samuel A. Nutile, Peter F. Landrum

Research output: Contribution to journalReview article

26 Citations (Scopus)

Abstract

Characterizing sediment-associated hydrophobic contaminants is problematic, because assessing the total amount of a compound available for chemical exchange with an organism is difficult. To address this, contaminant concentrations have been normalized for specific sediment characteristics (including organic C content) or the chemical activity has been estimated using passive samplers. Another approach to assess compound availability is to determine the extent of readily desorbed compound using resin extractions of sediment slurries. The present paper reviews the literature that uses Tenax® TA, a 2,6-diphenylene-oxide polymer as an extraction tool to measure bioavailability of hydrophobic organic contaminants in sediment. Some work has assessed the extent of desorption with sequential extractions to characterize the maximum rate and pool sizes for different desorbing fractions of bound contaminant. As such, the rapidly desorbing fraction has been well correlated with the extent of degradation, bioaccumulation, and toxicity of hydrophobic contaminants. A shortcut to measuring the full desorption curve to determine the rapidly desorbing compound is to use a single-point extraction, with 6 h or 24 h extractions being the most common. The extraction has been shown to be effective with laboratoryspiked sediments, field-collected sediments, laboratory-exposed organisms, field-collected organisms, and studies among laboratories. Furthermore, a literature-based model has described the bioaccumulation of polychlorinated biphenyls from independently measured field-collected sediments. Despite the success of this approach, applying the Tenax method to manage contaminated sediments is limited by the absence of a standard set of conditions to perform the extractions, as well as standard methods for using field sediments.

Original languageEnglish (US)
Pages (from-to)208-220
Number of pages13
JournalIntegrated Environmental Assessment and Management
Volume11
Issue number2
DOIs
StatePublished - Jan 1 2015

Fingerprint

literature review
bioavailability
desorption
pollutant
sediment
bioaccumulation
literature
sampler
PCB
resin
polymer
oxide
toxicity
degradation

All Science Journal Classification (ASJC) codes

  • Geography, Planning and Development
  • Environmental Science(all)

Cite this

@article{601e7e8592464cce8dce13d3761c0273,
title = "Tenax extraction of sediments to estimate desorption and bioavailability of hydrophobic contaminants: A literature review",
abstract = "Characterizing sediment-associated hydrophobic contaminants is problematic, because assessing the total amount of a compound available for chemical exchange with an organism is difficult. To address this, contaminant concentrations have been normalized for specific sediment characteristics (including organic C content) or the chemical activity has been estimated using passive samplers. Another approach to assess compound availability is to determine the extent of readily desorbed compound using resin extractions of sediment slurries. The present paper reviews the literature that uses Tenax{\circledR} TA, a 2,6-diphenylene-oxide polymer as an extraction tool to measure bioavailability of hydrophobic organic contaminants in sediment. Some work has assessed the extent of desorption with sequential extractions to characterize the maximum rate and pool sizes for different desorbing fractions of bound contaminant. As such, the rapidly desorbing fraction has been well correlated with the extent of degradation, bioaccumulation, and toxicity of hydrophobic contaminants. A shortcut to measuring the full desorption curve to determine the rapidly desorbing compound is to use a single-point extraction, with 6 h or 24 h extractions being the most common. The extraction has been shown to be effective with laboratoryspiked sediments, field-collected sediments, laboratory-exposed organisms, field-collected organisms, and studies among laboratories. Furthermore, a literature-based model has described the bioaccumulation of polychlorinated biphenyls from independently measured field-collected sediments. Despite the success of this approach, applying the Tenax method to manage contaminated sediments is limited by the absence of a standard set of conditions to perform the extractions, as well as standard methods for using field sediments.",
author = "Lydy, {Michael J.} and Harwood, {Amanda D.} and Nutile, {Samuel A.} and Landrum, {Peter F.}",
year = "2015",
month = "1",
day = "1",
doi = "10.1002/ieam.1603",
language = "English (US)",
volume = "11",
pages = "208--220",
journal = "Integrated Environmental Assessment and Management",
issn = "1551-3777",
publisher = "SETAC Press",
number = "2",

}

Tenax extraction of sediments to estimate desorption and bioavailability of hydrophobic contaminants : A literature review. / Lydy, Michael J.; Harwood, Amanda D.; Nutile, Samuel A.; Landrum, Peter F.

In: Integrated Environmental Assessment and Management, Vol. 11, No. 2, 01.01.2015, p. 208-220.

Research output: Contribution to journalReview article

TY - JOUR

T1 - Tenax extraction of sediments to estimate desorption and bioavailability of hydrophobic contaminants

T2 - A literature review

AU - Lydy, Michael J.

AU - Harwood, Amanda D.

AU - Nutile, Samuel A.

AU - Landrum, Peter F.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Characterizing sediment-associated hydrophobic contaminants is problematic, because assessing the total amount of a compound available for chemical exchange with an organism is difficult. To address this, contaminant concentrations have been normalized for specific sediment characteristics (including organic C content) or the chemical activity has been estimated using passive samplers. Another approach to assess compound availability is to determine the extent of readily desorbed compound using resin extractions of sediment slurries. The present paper reviews the literature that uses Tenax® TA, a 2,6-diphenylene-oxide polymer as an extraction tool to measure bioavailability of hydrophobic organic contaminants in sediment. Some work has assessed the extent of desorption with sequential extractions to characterize the maximum rate and pool sizes for different desorbing fractions of bound contaminant. As such, the rapidly desorbing fraction has been well correlated with the extent of degradation, bioaccumulation, and toxicity of hydrophobic contaminants. A shortcut to measuring the full desorption curve to determine the rapidly desorbing compound is to use a single-point extraction, with 6 h or 24 h extractions being the most common. The extraction has been shown to be effective with laboratoryspiked sediments, field-collected sediments, laboratory-exposed organisms, field-collected organisms, and studies among laboratories. Furthermore, a literature-based model has described the bioaccumulation of polychlorinated biphenyls from independently measured field-collected sediments. Despite the success of this approach, applying the Tenax method to manage contaminated sediments is limited by the absence of a standard set of conditions to perform the extractions, as well as standard methods for using field sediments.

AB - Characterizing sediment-associated hydrophobic contaminants is problematic, because assessing the total amount of a compound available for chemical exchange with an organism is difficult. To address this, contaminant concentrations have been normalized for specific sediment characteristics (including organic C content) or the chemical activity has been estimated using passive samplers. Another approach to assess compound availability is to determine the extent of readily desorbed compound using resin extractions of sediment slurries. The present paper reviews the literature that uses Tenax® TA, a 2,6-diphenylene-oxide polymer as an extraction tool to measure bioavailability of hydrophobic organic contaminants in sediment. Some work has assessed the extent of desorption with sequential extractions to characterize the maximum rate and pool sizes for different desorbing fractions of bound contaminant. As such, the rapidly desorbing fraction has been well correlated with the extent of degradation, bioaccumulation, and toxicity of hydrophobic contaminants. A shortcut to measuring the full desorption curve to determine the rapidly desorbing compound is to use a single-point extraction, with 6 h or 24 h extractions being the most common. The extraction has been shown to be effective with laboratoryspiked sediments, field-collected sediments, laboratory-exposed organisms, field-collected organisms, and studies among laboratories. Furthermore, a literature-based model has described the bioaccumulation of polychlorinated biphenyls from independently measured field-collected sediments. Despite the success of this approach, applying the Tenax method to manage contaminated sediments is limited by the absence of a standard set of conditions to perform the extractions, as well as standard methods for using field sediments.

UR - http://www.scopus.com/inward/record.url?scp=84929619433&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929619433&partnerID=8YFLogxK

U2 - 10.1002/ieam.1603

DO - 10.1002/ieam.1603

M3 - Review article

C2 - 25377271

AN - SCOPUS:84929619433

VL - 11

SP - 208

EP - 220

JO - Integrated Environmental Assessment and Management

JF - Integrated Environmental Assessment and Management

SN - 1551-3777

IS - 2

ER -