The 2016 Thermal Spray Roadmap

Armelle Vardelle, Christian Moreau, Jun Akedo, Hossein Ashrafizadeh, Christopher C. Berndt, Jörg Oberste Berghaus, Maher Boulos, Jeffrey Brogan, Athanasios C. Bourtsalas, Ali Dolatabadi, Mitchell Dorfman, Timothy John Eden, Pierre Fauchais, Gary Fisher, Frank Gaertner, Malko Gindrat, Rudolf Henne, Margaret Hyland, Eric Irissou, Eric H. Jordan & 22 others Khiam Aik Khor, Andreas Killinger, Yuk Chiu Lau, Chang Jiu Li, Li Li, Jon Longtin, Nicolaie Markocsan, Patrick J. Masset, Jiri Matejicek, Georg Mauer, André McDonald, Javad Mostaghimi, Sanjay Sampath, Günter Schiller, Kentaro Shinoda, Mark F. Smith, Asif Ansar Syed, Nickolas J. Themelis, Filofteia Laura Toma, Juan Pablo Trelles, Robert Vassen, Petri Vuoristo

Research output: Contribution to journalReview article

67 Citations (Scopus)

Abstract

Considerable progress has been made over the last decades in thermal spray technologies, practices and applications. However, like other technologies, they have to continuously evolve to meet new problems and market requirements. This article aims to identify the current challenges limiting the evolution of these technologies and to propose research directions and priorities to meet these challenges. It was prepared on the basis of a collection of short articles written by experts in thermal spray who were asked to present a snapshot of the current state of their specific field, give their views on current challenges faced by the field and provide some guidance as to the R&D required to meet these challenges. The article is divided in three sections that deal with the emerging thermal spray processes, coating properties and function, and biomedical, electronic, aerospace and energy generation applications.

Original languageEnglish (US)
Pages (from-to)1376-1440
Number of pages65
JournalJournal of Thermal Spray Technology
Volume25
Issue number8
DOIs
StatePublished - Dec 1 2016

Fingerprint

sprayers
emerging
coatings
Coatings
requirements
electronics
Hot Temperature
energy
Direction compound

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this

Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., ... Vuoristo, P. (2016). The 2016 Thermal Spray Roadmap. Journal of Thermal Spray Technology, 25(8), 1376-1440. https://doi.org/10.1007/s11666-016-0473-x
Vardelle, Armelle ; Moreau, Christian ; Akedo, Jun ; Ashrafizadeh, Hossein ; Berndt, Christopher C. ; Berghaus, Jörg Oberste ; Boulos, Maher ; Brogan, Jeffrey ; Bourtsalas, Athanasios C. ; Dolatabadi, Ali ; Dorfman, Mitchell ; Eden, Timothy John ; Fauchais, Pierre ; Fisher, Gary ; Gaertner, Frank ; Gindrat, Malko ; Henne, Rudolf ; Hyland, Margaret ; Irissou, Eric ; Jordan, Eric H. ; Khor, Khiam Aik ; Killinger, Andreas ; Lau, Yuk Chiu ; Li, Chang Jiu ; Li, Li ; Longtin, Jon ; Markocsan, Nicolaie ; Masset, Patrick J. ; Matejicek, Jiri ; Mauer, Georg ; McDonald, André ; Mostaghimi, Javad ; Sampath, Sanjay ; Schiller, Günter ; Shinoda, Kentaro ; Smith, Mark F. ; Syed, Asif Ansar ; Themelis, Nickolas J. ; Toma, Filofteia Laura ; Trelles, Juan Pablo ; Vassen, Robert ; Vuoristo, Petri. / The 2016 Thermal Spray Roadmap. In: Journal of Thermal Spray Technology. 2016 ; Vol. 25, No. 8. pp. 1376-1440.
@article{1962d724bc1142e88a079d267c863e64,
title = "The 2016 Thermal Spray Roadmap",
abstract = "Considerable progress has been made over the last decades in thermal spray technologies, practices and applications. However, like other technologies, they have to continuously evolve to meet new problems and market requirements. This article aims to identify the current challenges limiting the evolution of these technologies and to propose research directions and priorities to meet these challenges. It was prepared on the basis of a collection of short articles written by experts in thermal spray who were asked to present a snapshot of the current state of their specific field, give their views on current challenges faced by the field and provide some guidance as to the R&D required to meet these challenges. The article is divided in three sections that deal with the emerging thermal spray processes, coating properties and function, and biomedical, electronic, aerospace and energy generation applications.",
author = "Armelle Vardelle and Christian Moreau and Jun Akedo and Hossein Ashrafizadeh and Berndt, {Christopher C.} and Berghaus, {J{\"o}rg Oberste} and Maher Boulos and Jeffrey Brogan and Bourtsalas, {Athanasios C.} and Ali Dolatabadi and Mitchell Dorfman and Eden, {Timothy John} and Pierre Fauchais and Gary Fisher and Frank Gaertner and Malko Gindrat and Rudolf Henne and Margaret Hyland and Eric Irissou and Jordan, {Eric H.} and Khor, {Khiam Aik} and Andreas Killinger and Lau, {Yuk Chiu} and Li, {Chang Jiu} and Li Li and Jon Longtin and Nicolaie Markocsan and Masset, {Patrick J.} and Jiri Matejicek and Georg Mauer and Andr{\'e} McDonald and Javad Mostaghimi and Sanjay Sampath and G{\"u}nter Schiller and Kentaro Shinoda and Smith, {Mark F.} and Syed, {Asif Ansar} and Themelis, {Nickolas J.} and Toma, {Filofteia Laura} and Trelles, {Juan Pablo} and Robert Vassen and Petri Vuoristo",
year = "2016",
month = "12",
day = "1",
doi = "10.1007/s11666-016-0473-x",
language = "English (US)",
volume = "25",
pages = "1376--1440",
journal = "Journal of Thermal Spray Technology",
issn = "1059-9630",
publisher = "Springer New York",
number = "8",

}

Vardelle, A, Moreau, C, Akedo, J, Ashrafizadeh, H, Berndt, CC, Berghaus, JO, Boulos, M, Brogan, J, Bourtsalas, AC, Dolatabadi, A, Dorfman, M, Eden, TJ, Fauchais, P, Fisher, G, Gaertner, F, Gindrat, M, Henne, R, Hyland, M, Irissou, E, Jordan, EH, Khor, KA, Killinger, A, Lau, YC, Li, CJ, Li, L, Longtin, J, Markocsan, N, Masset, PJ, Matejicek, J, Mauer, G, McDonald, A, Mostaghimi, J, Sampath, S, Schiller, G, Shinoda, K, Smith, MF, Syed, AA, Themelis, NJ, Toma, FL, Trelles, JP, Vassen, R & Vuoristo, P 2016, 'The 2016 Thermal Spray Roadmap', Journal of Thermal Spray Technology, vol. 25, no. 8, pp. 1376-1440. https://doi.org/10.1007/s11666-016-0473-x

The 2016 Thermal Spray Roadmap. / Vardelle, Armelle; Moreau, Christian; Akedo, Jun; Ashrafizadeh, Hossein; Berndt, Christopher C.; Berghaus, Jörg Oberste; Boulos, Maher; Brogan, Jeffrey; Bourtsalas, Athanasios C.; Dolatabadi, Ali; Dorfman, Mitchell; Eden, Timothy John; Fauchais, Pierre; Fisher, Gary; Gaertner, Frank; Gindrat, Malko; Henne, Rudolf; Hyland, Margaret; Irissou, Eric; Jordan, Eric H.; Khor, Khiam Aik; Killinger, Andreas; Lau, Yuk Chiu; Li, Chang Jiu; Li, Li; Longtin, Jon; Markocsan, Nicolaie; Masset, Patrick J.; Matejicek, Jiri; Mauer, Georg; McDonald, André; Mostaghimi, Javad; Sampath, Sanjay; Schiller, Günter; Shinoda, Kentaro; Smith, Mark F.; Syed, Asif Ansar; Themelis, Nickolas J.; Toma, Filofteia Laura; Trelles, Juan Pablo; Vassen, Robert; Vuoristo, Petri.

In: Journal of Thermal Spray Technology, Vol. 25, No. 8, 01.12.2016, p. 1376-1440.

Research output: Contribution to journalReview article

TY - JOUR

T1 - The 2016 Thermal Spray Roadmap

AU - Vardelle, Armelle

AU - Moreau, Christian

AU - Akedo, Jun

AU - Ashrafizadeh, Hossein

AU - Berndt, Christopher C.

AU - Berghaus, Jörg Oberste

AU - Boulos, Maher

AU - Brogan, Jeffrey

AU - Bourtsalas, Athanasios C.

AU - Dolatabadi, Ali

AU - Dorfman, Mitchell

AU - Eden, Timothy John

AU - Fauchais, Pierre

AU - Fisher, Gary

AU - Gaertner, Frank

AU - Gindrat, Malko

AU - Henne, Rudolf

AU - Hyland, Margaret

AU - Irissou, Eric

AU - Jordan, Eric H.

AU - Khor, Khiam Aik

AU - Killinger, Andreas

AU - Lau, Yuk Chiu

AU - Li, Chang Jiu

AU - Li, Li

AU - Longtin, Jon

AU - Markocsan, Nicolaie

AU - Masset, Patrick J.

AU - Matejicek, Jiri

AU - Mauer, Georg

AU - McDonald, André

AU - Mostaghimi, Javad

AU - Sampath, Sanjay

AU - Schiller, Günter

AU - Shinoda, Kentaro

AU - Smith, Mark F.

AU - Syed, Asif Ansar

AU - Themelis, Nickolas J.

AU - Toma, Filofteia Laura

AU - Trelles, Juan Pablo

AU - Vassen, Robert

AU - Vuoristo, Petri

PY - 2016/12/1

Y1 - 2016/12/1

N2 - Considerable progress has been made over the last decades in thermal spray technologies, practices and applications. However, like other technologies, they have to continuously evolve to meet new problems and market requirements. This article aims to identify the current challenges limiting the evolution of these technologies and to propose research directions and priorities to meet these challenges. It was prepared on the basis of a collection of short articles written by experts in thermal spray who were asked to present a snapshot of the current state of their specific field, give their views on current challenges faced by the field and provide some guidance as to the R&D required to meet these challenges. The article is divided in three sections that deal with the emerging thermal spray processes, coating properties and function, and biomedical, electronic, aerospace and energy generation applications.

AB - Considerable progress has been made over the last decades in thermal spray technologies, practices and applications. However, like other technologies, they have to continuously evolve to meet new problems and market requirements. This article aims to identify the current challenges limiting the evolution of these technologies and to propose research directions and priorities to meet these challenges. It was prepared on the basis of a collection of short articles written by experts in thermal spray who were asked to present a snapshot of the current state of their specific field, give their views on current challenges faced by the field and provide some guidance as to the R&D required to meet these challenges. The article is divided in three sections that deal with the emerging thermal spray processes, coating properties and function, and biomedical, electronic, aerospace and energy generation applications.

UR - http://www.scopus.com/inward/record.url?scp=85003456408&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85003456408&partnerID=8YFLogxK

U2 - 10.1007/s11666-016-0473-x

DO - 10.1007/s11666-016-0473-x

M3 - Review article

VL - 25

SP - 1376

EP - 1440

JO - Journal of Thermal Spray Technology

JF - Journal of Thermal Spray Technology

SN - 1059-9630

IS - 8

ER -

Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO et al. The 2016 Thermal Spray Roadmap. Journal of Thermal Spray Technology. 2016 Dec 1;25(8):1376-1440. https://doi.org/10.1007/s11666-016-0473-x