The iljcorpoition of rigid composites into a Conformal Hydrophone

K. Schulze, G. Dayton, D. Laubscher, L. Webstep, E. Bibeau, R. Uiller, B. J. Kearlj, S. R. Brenneman, D. Cross, M. Haun, A. Narthasilpa, B. Jobes, A. Safari, T. Shrout, S. Y. Lynn, R. Wilson, J. Biggers

Research output: Contribution to journalArticle

4 Scopus citations

Abstract

During the past five years, numerous composite configurations have been analysed for hydrostatic transducer application. Although some of these composite con figurations have been flexible, a con figur ation with good sensitivity and mechanical durability has not beenproduced. The need for a sheet or mat, large area transducer that w ill conform to the hull of a ship has led to the in corporation of small rigid composite elements in to a macrocomposite. The goals set for the conformal transducer were sen sitivity greater than-200 dB re 1 V/pPa, operation to at least 7 MPa, maximum frequency of 100 Hz, conforming to a 0.10 m radius and a hydrophone secti on of at least 0.01 m2. In the study three types of rigid composites are used t odetermine the effect of compliant hinge material and flexible electrodes on thehydro statics ensitivity. Typical response of a 1-3 rod composite inflexible form is as ensitivity of-193 dB re 1 V/MPa, with acapacitance of 14 pf per m2 and only 2 dB degradation when operating at 7 MPa.

Original languageEnglish (US)
Pages (from-to)33-38
Number of pages6
JournalFerroelectrics
Volume50
Issue number1
DOIs
StatePublished - Nov 1 1983

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'The iljcorpoition of rigid composites into a Conformal Hydrophone'. Together they form a unique fingerprint.

  • Cite this

    Schulze, K., Dayton, G., Laubscher, D., Webstep, L., Bibeau, E., Uiller, R., Kearlj, B. J., Brenneman, S. R., Cross, D., Haun, M., Narthasilpa, A., Jobes, B., Safari, A., Shrout, T., Lynn, S. Y., Wilson, R., & Biggers, J. (1983). The iljcorpoition of rigid composites into a Conformal Hydrophone. Ferroelectrics, 50(1), 33-38. https://doi.org/10.1080/00150198308014429