The neighborhood method and its coupling with the wavelet method for signal separation of chaotic signals

Satish T.S. Bukkapatnam, Soundar Rajan Tirupatikumara, Akhlesh Lakhtakia, Parthasarathy Srinivasan

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

Signal separation, i.e., the elimination or suppression of extraneous components from measured signals, is an essential module of modern signal analysis. We report the development of two novel signal separation methods - (i) the neighborhood method (NM) and (ii) a modified wavelet method (MWM) - that seem to be aptly suited for signals acquired from machining process sensors, i.e., for chaotic signals with small, uniform Lyapunov exponents. For the NM, a variant of shadowing signal separation methods used for signal separation of chaotic signals, we establish theoretical bounds on performance under various noisy conditions and analyze its algorithmic complexity. Our MWM is an adaptation of Donoho's wavelet method to nonlinear, and possibly chaotic, signals with multiplicative noise. It incorporates certain features of the NM and it has lower algorithmic complexity than the NM, and is, therefore, more suitable for on-line implementation. Both methods were tested on chaotic signals corresponding to the reconstructed Rossler attractor. A discussion on the application of both methods to signals obtained from actual machining process sensors is provided in order to motivate their suitability to real-world nonlinear processes.

Original languageEnglish (US)
Pages (from-to)1351-1374
Number of pages24
JournalSignal Processing
Volume82
Issue number10
DOIs
StatePublished - Oct 1 2002

Fingerprint

Machining
Signal analysis
Sensors

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Software
  • Signal Processing
  • Computer Vision and Pattern Recognition
  • Electrical and Electronic Engineering

Cite this

@article{182543d99dd1494e9e693f430a454885,
title = "The neighborhood method and its coupling with the wavelet method for signal separation of chaotic signals",
abstract = "Signal separation, i.e., the elimination or suppression of extraneous components from measured signals, is an essential module of modern signal analysis. We report the development of two novel signal separation methods - (i) the neighborhood method (NM) and (ii) a modified wavelet method (MWM) - that seem to be aptly suited for signals acquired from machining process sensors, i.e., for chaotic signals with small, uniform Lyapunov exponents. For the NM, a variant of shadowing signal separation methods used for signal separation of chaotic signals, we establish theoretical bounds on performance under various noisy conditions and analyze its algorithmic complexity. Our MWM is an adaptation of Donoho's wavelet method to nonlinear, and possibly chaotic, signals with multiplicative noise. It incorporates certain features of the NM and it has lower algorithmic complexity than the NM, and is, therefore, more suitable for on-line implementation. Both methods were tested on chaotic signals corresponding to the reconstructed Rossler attractor. A discussion on the application of both methods to signals obtained from actual machining process sensors is provided in order to motivate their suitability to real-world nonlinear processes.",
author = "Bukkapatnam, {Satish T.S.} and Tirupatikumara, {Soundar Rajan} and Akhlesh Lakhtakia and Parthasarathy Srinivasan",
year = "2002",
month = "10",
day = "1",
doi = "10.1016/S0165-1684(02)00245-1",
language = "English (US)",
volume = "82",
pages = "1351--1374",
journal = "Signal Processing",
issn = "0165-1684",
publisher = "Elsevier",
number = "10",

}

The neighborhood method and its coupling with the wavelet method for signal separation of chaotic signals. / Bukkapatnam, Satish T.S.; Tirupatikumara, Soundar Rajan; Lakhtakia, Akhlesh; Srinivasan, Parthasarathy.

In: Signal Processing, Vol. 82, No. 10, 01.10.2002, p. 1351-1374.

Research output: Contribution to journalArticle

TY - JOUR

T1 - The neighborhood method and its coupling with the wavelet method for signal separation of chaotic signals

AU - Bukkapatnam, Satish T.S.

AU - Tirupatikumara, Soundar Rajan

AU - Lakhtakia, Akhlesh

AU - Srinivasan, Parthasarathy

PY - 2002/10/1

Y1 - 2002/10/1

N2 - Signal separation, i.e., the elimination or suppression of extraneous components from measured signals, is an essential module of modern signal analysis. We report the development of two novel signal separation methods - (i) the neighborhood method (NM) and (ii) a modified wavelet method (MWM) - that seem to be aptly suited for signals acquired from machining process sensors, i.e., for chaotic signals with small, uniform Lyapunov exponents. For the NM, a variant of shadowing signal separation methods used for signal separation of chaotic signals, we establish theoretical bounds on performance under various noisy conditions and analyze its algorithmic complexity. Our MWM is an adaptation of Donoho's wavelet method to nonlinear, and possibly chaotic, signals with multiplicative noise. It incorporates certain features of the NM and it has lower algorithmic complexity than the NM, and is, therefore, more suitable for on-line implementation. Both methods were tested on chaotic signals corresponding to the reconstructed Rossler attractor. A discussion on the application of both methods to signals obtained from actual machining process sensors is provided in order to motivate their suitability to real-world nonlinear processes.

AB - Signal separation, i.e., the elimination or suppression of extraneous components from measured signals, is an essential module of modern signal analysis. We report the development of two novel signal separation methods - (i) the neighborhood method (NM) and (ii) a modified wavelet method (MWM) - that seem to be aptly suited for signals acquired from machining process sensors, i.e., for chaotic signals with small, uniform Lyapunov exponents. For the NM, a variant of shadowing signal separation methods used for signal separation of chaotic signals, we establish theoretical bounds on performance under various noisy conditions and analyze its algorithmic complexity. Our MWM is an adaptation of Donoho's wavelet method to nonlinear, and possibly chaotic, signals with multiplicative noise. It incorporates certain features of the NM and it has lower algorithmic complexity than the NM, and is, therefore, more suitable for on-line implementation. Both methods were tested on chaotic signals corresponding to the reconstructed Rossler attractor. A discussion on the application of both methods to signals obtained from actual machining process sensors is provided in order to motivate their suitability to real-world nonlinear processes.

UR - http://www.scopus.com/inward/record.url?scp=0036777279&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036777279&partnerID=8YFLogxK

U2 - 10.1016/S0165-1684(02)00245-1

DO - 10.1016/S0165-1684(02)00245-1

M3 - Article

VL - 82

SP - 1351

EP - 1374

JO - Signal Processing

JF - Signal Processing

SN - 0165-1684

IS - 10

ER -