Thin, lightweight, foldable thermochromic displays on paper

Adam C. Siegel, Scott T. Phillips, Benjamin J. Wiley, George M. Whitesides

Research output: Contribution to journalArticle

150 Scopus citations

Abstract

This article describes an electronic display that is fabricated by patterning electrically conductive wires (heaters) with micron-scale dimensions on one side of a sheet of paper, and thermochromic ink on the opposite side. Passing electrical current through the wires heats the paper and changes the thermochromic ink from colored (black, green, or other colors) to transparent; this change in property reveals the paper underneath the ink - exposing any messages printed on the paper - and serves as the basis for a two-state "shutter" display. This type of display is thin (100 m), flat, lightweight (the display weighs <20 mg/cm2), can be folded, rolled, twisted, and creased while maintaining function, and ultimately can (if required) be disposed of by incineration. The display is appropriate for applications where information must be presented clearly (usually only once) for little cost (each display costs <$0.10/m2 in materials) and where limited electrical power is available.

Original languageEnglish (US)
Pages (from-to)2775-2781
Number of pages7
JournalLab on a Chip
Volume9
Issue number19
DOIs
StatePublished - Jan 1 2009

All Science Journal Classification (ASJC) codes

  • Bioengineering
  • Biochemistry
  • Chemistry(all)
  • Biomedical Engineering

Fingerprint Dive into the research topics of 'Thin, lightweight, foldable thermochromic displays on paper'. Together they form a unique fingerprint.

  • Cite this

    Siegel, A. C., Phillips, S. T., Wiley, B. J., & Whitesides, G. M. (2009). Thin, lightweight, foldable thermochromic displays on paper. Lab on a Chip, 9(19), 2775-2781. https://doi.org/10.1039/b905832j