Transfer behavior in low-amplitude oscillating wear of nanocrystalline copper under oil lubrication

Y. S. Zhang, K. Wang, Zhong Han, K. Lu

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

Nanocrystalline (NC) Cu samples were synthesized by means of surface mechanical attrition treatment, from which a layer of NC structure was formed on a coarse-grained Cu plate. Low-amplitude oscillating wear/ fretting behaviors of the NC Cu samples were investigated under oil lubrication in comparison with those of as-annealed coarse-grained Cu samples. It was found the NC Cu possesses a markedly enhanced wear resistance and a higher friction coefficient relative to the coarse-grained Cu. A continuous metal transfer layer is formed on the mating ball after fretting against the NC Cu, while no material transfer occurs for the as-annealed Cu. The effects of experimental parameters and the hardness of Cu samples on the formation of a transfer layer have been systematically investigated. The transfer layer is evidenced to play an important role in the enhanced wear resistance of the NC Cu, but it has a trivial effect on its high friction coefficient.

Original languageEnglish (US)
Pages (from-to)150-159
Number of pages10
JournalJournal of Materials Research
Volume23
Issue number1
DOIs
StatePublished - Jan 2008

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Transfer behavior in low-amplitude oscillating wear of nanocrystalline copper under oil lubrication'. Together they form a unique fingerprint.

Cite this