Transient burning behavior of phase-stabilized ammonium nitrate based airbag propellant

Jonathan T. Essel, J. Eric Boyer, Kenneth K. Kuo, Baoqi Zhang

Research output: Contribution to journalArticle

Abstract

Understanding the burning rate of an automotive airbag propellant is extremely important. Airbag propellants need to produce gas on the order of milliseconds. The speed with which the airbag inflator needs to work ensures that the propellant experiences a large pressure transient during combustion. Therefore, one factor that needs to be considered with airbag propellant combustion is how the propellant burns under a rapidly changing chamber pressure. This paper presents the results from a study on the dynamic burning behavior of a phase-stabilized ammonium nitrate (PSAN) propellant during rapid pressure changes. First, the steady-state burning behavior of the propellant was investigated with an optical strand burner and it was found that the burn rate could be fit to Saint-Robert's law with the expression being rb,SS = 1.393P 0.873 for pressures up to 28 MPa and rb,SS = 3.779P 0.570 for higher pressures. Second, the dynamic burning behavior of the propellant was measured directly in an "O-frame" chamber that used real-time x-ray radiography (RTR) to measure the instantaneous regression behavior of the propellant. For high-pressurization rate tests (~2000 MPa/s), the dynamic burning rate was found to be almost twice the steady-state value. Finally, the dynamic burning data taken from pressure and RTR system measurements was fit to a correlation relating the dynamic burning rate to the instantaneous chamber pressure and pressurization rate. Almost all of the experimentally determined dynamic burn rates were found to be within ±15% of the correlated expression.

Original languageEnglish (US)
Pages (from-to)473-486
Number of pages14
JournalInternational Journal of Energetic Materials and Chemical Propulsion
Volume11
Issue number5
DOIs
StatePublished - Dec 1 2012

Fingerprint

Propellants
Nitrates
Pressurization
ammonium nitrate
Radiography
Fuel burners
Gases
X rays

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Cite this

@article{e6f07f47f854432aa7fb14194076d06b,
title = "Transient burning behavior of phase-stabilized ammonium nitrate based airbag propellant",
abstract = "Understanding the burning rate of an automotive airbag propellant is extremely important. Airbag propellants need to produce gas on the order of milliseconds. The speed with which the airbag inflator needs to work ensures that the propellant experiences a large pressure transient during combustion. Therefore, one factor that needs to be considered with airbag propellant combustion is how the propellant burns under a rapidly changing chamber pressure. This paper presents the results from a study on the dynamic burning behavior of a phase-stabilized ammonium nitrate (PSAN) propellant during rapid pressure changes. First, the steady-state burning behavior of the propellant was investigated with an optical strand burner and it was found that the burn rate could be fit to Saint-Robert's law with the expression being rb,SS = 1.393P 0.873 for pressures up to 28 MPa and rb,SS = 3.779P 0.570 for higher pressures. Second, the dynamic burning behavior of the propellant was measured directly in an {"}O-frame{"} chamber that used real-time x-ray radiography (RTR) to measure the instantaneous regression behavior of the propellant. For high-pressurization rate tests (~2000 MPa/s), the dynamic burning rate was found to be almost twice the steady-state value. Finally, the dynamic burning data taken from pressure and RTR system measurements was fit to a correlation relating the dynamic burning rate to the instantaneous chamber pressure and pressurization rate. Almost all of the experimentally determined dynamic burn rates were found to be within ±15{\%} of the correlated expression.",
author = "Essel, {Jonathan T.} and Boyer, {J. Eric} and Kuo, {Kenneth K.} and Baoqi Zhang",
year = "2012",
month = "12",
day = "1",
doi = "10.1615/IntJEnergeticMaterialsChemProp.2013005394",
language = "English (US)",
volume = "11",
pages = "473--486",
journal = "International Journal of Energetic Materials and Chemical Propulsion",
issn = "2150-766X",
publisher = "Begell House Inc.",
number = "5",

}

Transient burning behavior of phase-stabilized ammonium nitrate based airbag propellant. / Essel, Jonathan T.; Boyer, J. Eric; Kuo, Kenneth K.; Zhang, Baoqi.

In: International Journal of Energetic Materials and Chemical Propulsion, Vol. 11, No. 5, 01.12.2012, p. 473-486.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Transient burning behavior of phase-stabilized ammonium nitrate based airbag propellant

AU - Essel, Jonathan T.

AU - Boyer, J. Eric

AU - Kuo, Kenneth K.

AU - Zhang, Baoqi

PY - 2012/12/1

Y1 - 2012/12/1

N2 - Understanding the burning rate of an automotive airbag propellant is extremely important. Airbag propellants need to produce gas on the order of milliseconds. The speed with which the airbag inflator needs to work ensures that the propellant experiences a large pressure transient during combustion. Therefore, one factor that needs to be considered with airbag propellant combustion is how the propellant burns under a rapidly changing chamber pressure. This paper presents the results from a study on the dynamic burning behavior of a phase-stabilized ammonium nitrate (PSAN) propellant during rapid pressure changes. First, the steady-state burning behavior of the propellant was investigated with an optical strand burner and it was found that the burn rate could be fit to Saint-Robert's law with the expression being rb,SS = 1.393P 0.873 for pressures up to 28 MPa and rb,SS = 3.779P 0.570 for higher pressures. Second, the dynamic burning behavior of the propellant was measured directly in an "O-frame" chamber that used real-time x-ray radiography (RTR) to measure the instantaneous regression behavior of the propellant. For high-pressurization rate tests (~2000 MPa/s), the dynamic burning rate was found to be almost twice the steady-state value. Finally, the dynamic burning data taken from pressure and RTR system measurements was fit to a correlation relating the dynamic burning rate to the instantaneous chamber pressure and pressurization rate. Almost all of the experimentally determined dynamic burn rates were found to be within ±15% of the correlated expression.

AB - Understanding the burning rate of an automotive airbag propellant is extremely important. Airbag propellants need to produce gas on the order of milliseconds. The speed with which the airbag inflator needs to work ensures that the propellant experiences a large pressure transient during combustion. Therefore, one factor that needs to be considered with airbag propellant combustion is how the propellant burns under a rapidly changing chamber pressure. This paper presents the results from a study on the dynamic burning behavior of a phase-stabilized ammonium nitrate (PSAN) propellant during rapid pressure changes. First, the steady-state burning behavior of the propellant was investigated with an optical strand burner and it was found that the burn rate could be fit to Saint-Robert's law with the expression being rb,SS = 1.393P 0.873 for pressures up to 28 MPa and rb,SS = 3.779P 0.570 for higher pressures. Second, the dynamic burning behavior of the propellant was measured directly in an "O-frame" chamber that used real-time x-ray radiography (RTR) to measure the instantaneous regression behavior of the propellant. For high-pressurization rate tests (~2000 MPa/s), the dynamic burning rate was found to be almost twice the steady-state value. Finally, the dynamic burning data taken from pressure and RTR system measurements was fit to a correlation relating the dynamic burning rate to the instantaneous chamber pressure and pressurization rate. Almost all of the experimentally determined dynamic burn rates were found to be within ±15% of the correlated expression.

UR - http://www.scopus.com/inward/record.url?scp=84877150610&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84877150610&partnerID=8YFLogxK

U2 - 10.1615/IntJEnergeticMaterialsChemProp.2013005394

DO - 10.1615/IntJEnergeticMaterialsChemProp.2013005394

M3 - Article

VL - 11

SP - 473

EP - 486

JO - International Journal of Energetic Materials and Chemical Propulsion

JF - International Journal of Energetic Materials and Chemical Propulsion

SN - 2150-766X

IS - 5

ER -