Uniformity of simultaneous powder deposition in three parallel-oriented cylindrical containers

X. Xie, V. M. Puri

Research output: Contribution to conferencePaperpeer-review

Abstract

The second generation mass deposition tester (MDT-II) was used to investigate the uniformity of simultaneous powder deposition in three parallel cylindrical containers. In this research, the effect of locations within the container and feed shoe speed on powder deposition were studied. The current results demonstrated that for the alumina powder used in this research (1) at 20 and 100 mm/s feed shoe speeds, the center area had the highest final mass values; (2) at 200 mm/s, the final mass value distribution was irregular and more complex; (3) the three feed shoe speeds led to no difference in filling uniformity; (4) the center and the right containers had similar final mass value distribution pattern.

Original languageEnglish (US)
StatePublished - Dec 1 2005
Event2005 ASAE Annual International Meeting - Tampa, FL, United States
Duration: Jul 17 2005Jul 20 2005

Other

Other2005 ASAE Annual International Meeting
CountryUnited States
CityTampa, FL
Period7/17/057/20/05

All Science Journal Classification (ASJC) codes

  • Agricultural and Biological Sciences(all)
  • Bioengineering

Fingerprint Dive into the research topics of 'Uniformity of simultaneous powder deposition in three parallel-oriented cylindrical containers'. Together they form a unique fingerprint.

Cite this