Use of FRF for RC frames in seismic zones: Part I. Evaluation of FRP beam-column joint rehabilitation techniques

Aly Marei Said, M. L. Nehdi

Research output: Contribution to journalArticle

33 Citations (Scopus)

Abstract

Multi-storey reinforced concrete frames that were built prior to the 1970's generally do not meet current seismic design code requirements. The lateral load carrying capacity of these structures is often insufficient due to non-ductile reinforcement detailing, which includes either insufficient or no beam-column joint transverse reinforcement. It was observed during recent earthquakes that deficient beam-column joints can jeopardise the integrity of entire structures. Thus, several beam-column joint rehabilitation techniques have emerged to upgrade such substandard joints. It is essential to evaluate the standings of joints rehabilitated with such techniques based on current design code requirements. This paper critically examines beam-column joint rehabilitation techniques using FRP that emerged in the last decade. For this purpose, a full-scale code-conforming beam-column joint was made and tested under reversed cyclic load to serve as a benchmark for this comparison. Enhancements imparted to substandard beam-column joints by FRP rehabilitation techniques in terms of strength, ductility and energy dissipation gains are assessed. It is shown that FRP joints repair schemes generally enhanced the performance of substandard joints, but they often came short of satisfying current standard level performance, and that different rehabilitation strategies can be adopted depending on the type of joint deficiency and the purpose of the rehabilitation scheme.

Original languageEnglish (US)
Pages (from-to)205-226
Number of pages22
JournalApplied Composite Materials
Volume11
Issue number4
DOIs
StatePublished - Jul 1 2004

Fingerprint

Patient rehabilitation
Reinforcement
Cyclic loads
Seismic design
Load limits
Ductility
Reinforced concrete
Energy dissipation
Earthquakes
Repair

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites

Cite this

@article{4017b4b62a8548cbbad4d57a0d8a2f71,
title = "Use of FRF for RC frames in seismic zones: Part I. Evaluation of FRP beam-column joint rehabilitation techniques",
abstract = "Multi-storey reinforced concrete frames that were built prior to the 1970's generally do not meet current seismic design code requirements. The lateral load carrying capacity of these structures is often insufficient due to non-ductile reinforcement detailing, which includes either insufficient or no beam-column joint transverse reinforcement. It was observed during recent earthquakes that deficient beam-column joints can jeopardise the integrity of entire structures. Thus, several beam-column joint rehabilitation techniques have emerged to upgrade such substandard joints. It is essential to evaluate the standings of joints rehabilitated with such techniques based on current design code requirements. This paper critically examines beam-column joint rehabilitation techniques using FRP that emerged in the last decade. For this purpose, a full-scale code-conforming beam-column joint was made and tested under reversed cyclic load to serve as a benchmark for this comparison. Enhancements imparted to substandard beam-column joints by FRP rehabilitation techniques in terms of strength, ductility and energy dissipation gains are assessed. It is shown that FRP joints repair schemes generally enhanced the performance of substandard joints, but they often came short of satisfying current standard level performance, and that different rehabilitation strategies can be adopted depending on the type of joint deficiency and the purpose of the rehabilitation scheme.",
author = "Said, {Aly Marei} and Nehdi, {M. L.}",
year = "2004",
month = "7",
day = "1",
doi = "10.1023/B:ACMA.0000035462.41572.7a",
language = "English (US)",
volume = "11",
pages = "205--226",
journal = "Applied Composite Materials",
issn = "0929-189X",
publisher = "Springer Netherlands",
number = "4",

}

Use of FRF for RC frames in seismic zones : Part I. Evaluation of FRP beam-column joint rehabilitation techniques. / Said, Aly Marei; Nehdi, M. L.

In: Applied Composite Materials, Vol. 11, No. 4, 01.07.2004, p. 205-226.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Use of FRF for RC frames in seismic zones

T2 - Part I. Evaluation of FRP beam-column joint rehabilitation techniques

AU - Said, Aly Marei

AU - Nehdi, M. L.

PY - 2004/7/1

Y1 - 2004/7/1

N2 - Multi-storey reinforced concrete frames that were built prior to the 1970's generally do not meet current seismic design code requirements. The lateral load carrying capacity of these structures is often insufficient due to non-ductile reinforcement detailing, which includes either insufficient or no beam-column joint transverse reinforcement. It was observed during recent earthquakes that deficient beam-column joints can jeopardise the integrity of entire structures. Thus, several beam-column joint rehabilitation techniques have emerged to upgrade such substandard joints. It is essential to evaluate the standings of joints rehabilitated with such techniques based on current design code requirements. This paper critically examines beam-column joint rehabilitation techniques using FRP that emerged in the last decade. For this purpose, a full-scale code-conforming beam-column joint was made and tested under reversed cyclic load to serve as a benchmark for this comparison. Enhancements imparted to substandard beam-column joints by FRP rehabilitation techniques in terms of strength, ductility and energy dissipation gains are assessed. It is shown that FRP joints repair schemes generally enhanced the performance of substandard joints, but they often came short of satisfying current standard level performance, and that different rehabilitation strategies can be adopted depending on the type of joint deficiency and the purpose of the rehabilitation scheme.

AB - Multi-storey reinforced concrete frames that were built prior to the 1970's generally do not meet current seismic design code requirements. The lateral load carrying capacity of these structures is often insufficient due to non-ductile reinforcement detailing, which includes either insufficient or no beam-column joint transverse reinforcement. It was observed during recent earthquakes that deficient beam-column joints can jeopardise the integrity of entire structures. Thus, several beam-column joint rehabilitation techniques have emerged to upgrade such substandard joints. It is essential to evaluate the standings of joints rehabilitated with such techniques based on current design code requirements. This paper critically examines beam-column joint rehabilitation techniques using FRP that emerged in the last decade. For this purpose, a full-scale code-conforming beam-column joint was made and tested under reversed cyclic load to serve as a benchmark for this comparison. Enhancements imparted to substandard beam-column joints by FRP rehabilitation techniques in terms of strength, ductility and energy dissipation gains are assessed. It is shown that FRP joints repair schemes generally enhanced the performance of substandard joints, but they often came short of satisfying current standard level performance, and that different rehabilitation strategies can be adopted depending on the type of joint deficiency and the purpose of the rehabilitation scheme.

UR - http://www.scopus.com/inward/record.url?scp=3242772914&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=3242772914&partnerID=8YFLogxK

U2 - 10.1023/B:ACMA.0000035462.41572.7a

DO - 10.1023/B:ACMA.0000035462.41572.7a

M3 - Article

AN - SCOPUS:3242772914

VL - 11

SP - 205

EP - 226

JO - Applied Composite Materials

JF - Applied Composite Materials

SN - 0929-189X

IS - 4

ER -